SFH6711 Datasheet | Vishay

DESCRIPTION The SFH67xx high speed optocoupler series consists of a Ga Al As infrared emitting diode, optically coupled with an integrated photo detector. The detector incorporates a Schmitt-Trigger stage for improved noise immunity. Using the enable input, the output can switched to the high ohmic state, which is necessary for data bus applications. A Faraday shield provides a mon mode transient immunity of 1000 V/μ at VCM = 50 V for SFH6700, SFH6701, SFH6702, SFH6705 and 2500 V/μ at VCM = 400 V for SFH6711, SFH6712, SFH6719. The SFH67xx uses an industry standard DIP-8 package. With standard lead bending, creepage distance and clearance of ≥ 7 mm with lead bending options 6, 7, and 9 ≥ 8 mm are achieved. FEATURES - Data rate 5 MBits/s (2.5 MBit/s over temperature) - Buffer - Isolation test voltage, 5300 VRMS for 1 min - TTL, LSTTL and CMOS patible - Internal shield for very high mon mode transient immunity - Wide supply voltage range (4.5 V to 15 V) - Low input current (1.6 m A to 5 m A) - Three state output (SFH6700, SFH6719) - Totem pole output (SFH6701, SFH6702, SFH6711, SFH6712) - Open collector output (SFH6705) - Material categorization: for definitions of pliance please see .vishay./doc?99912 APPLICATIONS - Industrial control - Replace pulse transformers - Routine logic interfacing - Motion/power control - High speed line receiver - Microprocessor system interfaces - puter peripheral interfaces AGENCY APPROVALS - UL1577 - DIN EN 60747-5-5 (VDE 0884) available with option 1 (pending) - c UL - CQC ORDERING INFORMATION # # -...