900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Vishay Intertechnology Electronic Components Datasheet

SIP32510 Datasheet

Slew Rate Controlled Load Switch

No Preview Available !

SiP32510
Vishay Siliconix
1.2 V to 5.5 V, Slew Rate Controlled Load Switch in TSOT23-6
DESCRIPTION
SiP32510 is a slew rate controlled load switches designed for
1.2 V to 5.5 V operation.
The switch element is of n-channel device that provides low
RON of 44 mtypically over a wide range of input.
SiP32510 has low switch on-resistance starting at 1.5 V input
supply. It features a controlled soft on slew rate of typical
1.6 ms that limits the inrush current for designs of heavy
capacitive load and minimizes the resulting voltage droop at
the power rails. With a typical turn on delay of 0.4 ms, the
total turn on time is typically 2 ms.
The SiP32510 features a low voltage control logic interface
(On/Off interface) that can interface with low voltage control
signals without extra level shifting circuit.
The SiP32510 has exceptionally low shutdown current and
provides reverse blocking to prevent high current flowing into
the power source.
SiP32510 integrates a switch OFF output discharge circuit.
SiP32510 is available in TSOT23-6 package.
TYPICAL APPLICATION CIRCUIT
FEATURES
• 1.2 V to 5.5 V operation voltage range
• Flat low RON down to 1.5 V
• 44 mtypical from 1.8 V to 5 V
• Slew rate controlled turn-on: 1.6 ms at 3.3 V
• Low quiescent current < 1 µA when disabled
10.5 µA typical at VIN = 1.2 V
Available
• Reverse current blocking when switch is off, with
guaranteed less than 2 µA leakage
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• PDAs/smart phones
• Ultrabook and notebook computer
• Tablet devices
• Portable media players
• Digital camera
• GPS navigation devices
• Data storage devices
• Optical, industrial, medical, and healthcare devices
• Peripherals
• Office automation
• Networking
VIN
CIN
4.7 µF
IN OUT
SiP32510
EN
EN
GND
VOUT
C OUT
0.1 µF
GND
Figure 1 - SiP32510 Typical Application Circuit
GND
ORDERING INFORMATION
Temperature Range
- 40 °C to 85 °C
Note:
GE3 denotes halogen-free and RoHS compliant
Package
TSOT23-6
Marking
LF
Part Number
SiP32510DT-T1-GE3
Document Number: 63577
For technical questions, contact: powerictechsupport@vishay.com
www.vishay.com
S13-1533-Rev. C, 08-Jul-13
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


Vishay Intertechnology Electronic Components Datasheet

SIP32510 Datasheet

Slew Rate Controlled Load Switch

No Preview Available !

SiP32510
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS
Parameter
Limit
Supply Input Voltage (VIN)
Enable Input Voltage (VEN)
Output Voltage (VOUT)
Maximum Continuous Switch Current (Imax.)c
Maximum Repetitive Pulsed Current (1 ms, 10 % Duty Cycle)c
Maximum Non-Repetitive Pulsed Current (100 µs, EN = Active)c
- 0.3 to 6
- 0.3 to 6
- 0.3 to 6
3
6
12
ESD Rating (HBM)
>4
ESD Rating (CDM)
1.5
Junction Temperature (TJ)
Thermal Resistance (JA)a
Power Dissipation (PD)a,b
Notes:
a. Device mounted with all leads and power pad soldered or welded to PC board, see PCB layout.
b. Derate 6.66 mW/°C above TA = 25 °C, see PCB layout.
c. TA = 25 °C.
- 40 to 150
150
833
Unit
V
A
kV
°C
°C/W
mW
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating/conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING RANGE
Parameter
Input Voltage Range (VIN)
Operating Junction Temperature Range (TJ)
Limit
1.2 to 5.5
- 40 to 125
SPECIFICATIONS
Parameter
Operating Voltagec
Symbol
VIN
Quiescent Current
IQ
Off Supply Current
Off Switch Current
Reverse Blocking Current
IQ(off)
IDS(off)
IRB
On-Resistance
RDS(on)
On-Resistance Temp.-Coefficient TCRDS
Test Conditions Unless Specified
VIN = 5 V, TA = - 40 °C to 85 °C
(Typical values are at TA = 25 °C)
VIN = 1.2 V, EN = active
VIN = 1.8 V, EN = active
VIN = 2.5 V, EN = active
VIN = 3.6 V, EN = active
VIN = 4.3 V, EN = active
VIN = 5 V, EN = active
EN = inactive, OUT = open
EN = inactive, OUT = GND
VOUT = 5 V, VIN = 0 V, VEN = inactive
VIN = 1.8 V, IL = 100 mA, TA = 25 °C
VIN = 2.5 V, IL = 100 mA, TA = 25 °C
VIN = 3.6 V, IL = 100 mA, TA = 25 °C
VIN = 4.3 V, IL = 100 mA, TA = 25 °C
VIN = 5 V, IL = 100 mA, TA = 25 °C
Unit
V
°C
Limits
- 40 °C to 85 °C
Min.a
1.2
Typ.b
-
Max.a
5.5
- 10.5 17
- 21 30
- 34 50
- 54 90
- 68 110
- 105 180
- -1
- -1
- - 10
- 45 53
- 44 52
- 44 52
- 44 52
- 46 52
- 3570 -
Unit
V
µA
m
ppm/°C
www.vishay.com
For technical questions, contact: powerictechsupport@vishay.com
Document Number: 63577
2 S13-1533-Rev. C, 08-Jul-13
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


Part Number SIP32510
Description Slew Rate Controlled Load Switch
Maker Vishay
PDF Download

SIP32510 Datasheet PDF






Similar Datasheet

1 SIP32510 Slew Rate Controlled Load Switch
Vishay





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy