www.vishay.com
TGL41-6.8A thru TGL41-200A
Vishay General Semiconductor
TRANSZorb® Transient Voltage Suppressors
DO-213AB (GL41)
FEATURES
• Plastic MELF package
• Ideal for automated placement
• Glass passivated pallet chip junction
• Available in uni-directional polarity only
• 400 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate
(duty cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 250 °C
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
VBR uni-directional
6.45 V to 210 V
VWM
5.8 V to 171 V
PPPM
PD
IFSM
400 W, 200 W
1.0 W
40 A
TJ max.
150 °C
Polarity
Uni-directional
Package
DO-213AB (GL41)
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
MECHANICAL DATA
Case: DO-213AB (GL41)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: Blue band denotes the cathode which is positive
with respect to the anode under normal TVS operation
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1)
PPPM
400
Power dissipation on infinite heatsink at TL = 75 °C
Peak pulse current with a 10/1000 μs waveform (1) (fig. 3)
Peak forward surge current, 8.3 ms half sine-wave uni-directional only (2)
PD
IPPM
IFSM
1.0
See next table
40
Maximum instantaneous forward voltage at 25 A for uni-directional only
VF
3.5
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2. Rating is 200 W above 91 V
(2) Measured at 8.3 ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minute maximum
UNIT
W
W
A
A
V
°C
Revision: 03-Jun-15
1 Document Number: 88403
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
