TPSMA27A Datasheet | Vishay

FEATURES - Junction passivation optimized design passivated anisotropic rectifier technology Available - TJ = 185 °C capability suitable for high reliability and automotive requirement - Available in uni-directional polarity only - 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % Available - Excellent clamping capability - Very fast response time - Low incremental surge resistance - Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C - AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 - Material categorization: for definitions of pliance please see .vishay./doc?99912 MECHANICAL DATA Case: SMA (DO-214AC) Molding pound meets UL 94 V-0 flammability rating Base P/NHE3_X - Ro HS-pliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, Ro HS-pliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, ...) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 HE3 and HM3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 3) Peak power pulse current with a 10/1000 μs waveform (1) (fig. 1) Power dissipation at TA = 25 °C (4) Peak forward surge current 8.3 ms single half sine-wave (3) Maximum instantaneous forward voltage at 25 A (3) Operating junction and storage temperature range PPPM IPPM PD IFSM VF TJ, TSTG 400 See next table 1.0 40 3.5 -65 to +185 Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) Mounted on PCB with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads attached to each terminal (3) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum (4) Mounted on minimum remended pad layout UNIT W A W A V °C Revision: 23-Jan-2024 Document Number: 88405 For technical...