TPSMC18A Datasheet | Vishay

FEATURES - Junction passivation optimized design passivated anisotropic rectifier technology Available - TJ = 185 °C capability suitable for high reliability and automotive requirement - Available in unidirectional polarity only - 1500 W peak pulse power capability with a 10/1000 μs waveform Available - Excellent clamping capability - Very fast response time - Low incremental surge resistance - Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C - AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 - Material categorization: for definitions of pliance please see .vishay./doc?99912 MECHANICAL DATA Case: SMC (DO-214AB) Molding pound meets UL 94 V-0 flammability rating Base P/NHE3_X - Ro HS-pliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, Ro HS-pliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, ...) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 HE3 and HM3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) PARAMETER SYMBOL Peak pulse power dissipation with a 10/1000 μs waveform (fig. 3) (1)(2) Peak power pulse current with a 10/1000 μs waveform (fig. 1) (1) Peak forward surge current 8.3 ms single half sine-wave (2)(3) Maximum instantaneous forward voltage at 100 A (2)(3) PPPM IPPM IFSM VF Operating junction and storage temperature range TJ, TSTG VALUE 1500 See table next page 200 3.5 -65 to +185 Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads at each terminal (3) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum UNIT W A A V °C Revision: 19-Jan-2024 Document Number: 88407 For technical questions within your region: Diodes Americas@vishay., Diodes Asia@vishay., Diodes Europe@vishay. THIS DOCUMENT IS...