TSOP18333 Datasheet | Vishay

DESCRIPTION This IR receiver series is optimized for short burst remote control systems in different environments. The customer can chose between different IC settings (AGC variants), to find the optimum solution for his application. The higher the AGC, the better noise is suppressed, but the lower the code patibility. The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. These ponents have not been qualified to automotive specifications. FEATURES - Individual IC settings to reach maximum performance - Immunity against noise (lamps, LCD TV, Wi-Fi) - Low supply current - Photo detector and preamplifier in one package - Supply voltage: 2.0 V to 5.5 V - Material categorization: for definitions of pliance please see .vishay./doc?99912 APPLICATIONS - Infrared remote control systems DESIGN SUPPORT TOOLS - 3D models - Window size calculator BLOCK DIAGRAM 16833-13 3 30 kΩ Input Band pass Demodulator Control circuit Rev. 1.8, 08-Aug-2023 Document Number: 82802 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000 Datasheet Values Refer to PCN-OPT-1288-2023 .vishay. TSOP181.., TSOP183.., TSOP185.. Vishay Semiconductors MECHANICAL DATA 1 = OUT, 2 = GND, 3 = VS ORDERING CODE TSOP18... - 1500 pieces in bags 1 2 APPLICATION...