TSOP31533 Datasheet | Vishay

DESCRIPTION This IR receiver series is optimized for short burst remote control systems in different environments. The customer can chose between different IC settings (AGC variants), to find the optimum solution for his application. The higher the AGC, the better noise is suppressed, but the lower the code patibility. The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. These ponents have not been qualified to automotive specifications. FEATURES - Individual IC settings to reach maximum performance - Immunity against noise (lamps, LCD TV, Wi-Fi) - Low supply current - Photo detector and preamplifier in one package - Supply voltage: 2.0 V to 5.5 V - Material categorization: for definitions of pliance please see .vishay./doc?99912 DESIGN SUPPORT TOOLS - 3D models BLOCK DIAGRAM 30 kΩ Input Band pass Demodulator Control circuit 2 VS 3 OUT 1 GND Rev. 1.7, 02-Aug-2021 Document Number: 82493 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000 Datasheet Values Refer to PCN-OPT-1308-2024 .vishay. TSOP311.., TSOP313.., TSOP315.. Vishay Semiconductors MECHANICAL DATA Pinning: 1 = GND, 2 = VS, 3 = OUT 1 2 3 ORDERING CODE TSO.1. - 1000 pieces in tubes APPLICATION CIRCUIT 17170-14 Transmitter IR receiver with...