TSOP37236H Datasheet | Vishay

FEATURES - Very low supply current - Photo detectors and preamplifier in one package - Internal filter for PCM frequency - Supply voltage: 2.5 V to 5.5 V - Improved immunity against ambient light - Insensitive to supply voltage ripple and noise - External metal shield - Material categorization: for definitions of pliance please see .vishay./doc?99912 DESCRIPTION The TSOP372..H, TSOP374..H series are miniaturized receiver modules for infrared remote control systems. A PIN diode and a preamplifier are assembled on a PCB, the epoxy lens cap contains an IR filter. The TSOP374..H series devices are optimized to suppress almost all spurious pulses from energy saving lamps like CFLs. The AGC4 used in the TSOP374..H may suppress some data signals. The TSOP372..H series are provided primarily for patibility with old AGC2 designs. New designs should prefer the TSOP374..H series containing the newer AGC4. These ponents have not been qualified according to automotive specifications. PARTS TABLE 36 k Hz Carrier 38 k Hz frequency 40 k Hz 56 k Hz Package Pinning Dimensions (mm) Mounting Application Best choice for LEGACY, FOR LONG BURST REMOTE CONTROLS (AGC2) REMENDED FOR LONG BURST CODES (AGC4) TSOP37436H (1)(/2)(3) TSOP37238H TSOP37438H (4)(5)(8) TSOP37240H TSOP37440H TSOP37256H TSOP37456 H(6)(7) Belobog shield 1 = OUT, 2, 3, 6, 7, 8 = GND, 4, 5 = VS 4.3 W x 4.3 H x 1.0 D Remote control (1) RC-5 (2) RC-6 (3) Panasonic (4) NEC (5) Sharp (6) r-step (7) Thomson RCA (8) r-map Rev. 2.1,...