TSOP53436DF1P Datasheet | Vishay

DESCRIPTION This IR receiver series is optimized for long burst remote control systems in different environments. The customer can chose between different IC settings (AGC variants), to find the optimum solution for his application. The higher the AGC, the better noise is suppressed, but the lower the code patibility. The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. These ponents have not been qualified to automotive specifications. FEATURES - Individual IC settings to reach maximum performance - Immunity against noise (lamps, LCD TV, Wi-Fi) - Low supply current - Photo detector and preamplifier in one package - Supply voltage: 2.0 V to 5.5 V - Material categorization: for definitions of pliance please see .vishay./doc?99912 APPLICATIONS - Infrared remote control systems DESIGN SUPPORT TOOLS - 3D models - Window size calculator BLOCK DIAGRAM 30 kΩ Input Band pass Demodulator 16833-22 Control circuit VS OUT GND Rev. 1.4, 09-Aug-2023 Document Number: 82892 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000 Datasheet Values Refer to PCN-OPT-1225-2022-REV-0 .vishay. TSOP532..DF1P, TSOP534..DF1P Vishay Semiconductors MECHANICAL DATA Pinning for TSOP53...DF1P: 1 = OUT, 2 = GND, 3 = VS 1 2 3 ORDERING CODE TSOP53...DF1P - 1100 pieces in tape and reel APPLICATION CIRCUIT 17170-14...