Leaded ceramic multilayer
• Very high capacitance per unit
• Low cost.
These conformally coated radial
leaded capacitors are designed for
commercial and industrial
applications in four dielectrics,
NP0 (ultra-stable), X7R (stable) and
Z5U, Y5V (general purpose).
Applications include timing,
comparison and biasing. Mono-kap™
capacitors are suitable for automatic
The basic capacitor construction
consists of ceramic dielectric materials
et4U.com processed into a tape with a typical
thickness range from
0.025 to 0.076 mm. Metal electrode
patterns are applied using a thick film
screening process. Multiple layers are
stacked and laminated in such a
manner that electrodes are alternately
exposed when the pattern is cut into
individual chip capacitors. The
capacitors are fired through a high
temperature profile to mature the
ceramic and metal into a
Fig.1 Component outlines.
Metal end terminations are applied
and fired to provide electrical
connection between the individual
layers. Tinned leads are attached using
Encapsulation consists of a
moisture-resistant gold colour
conformal epoxy coating that meets
the flame requirements of “UL94V-0”.
QUICK REFERENCE DATA
Rated DC voltage
Tolerance on capacitance
305 ..... 306 .....
10 pF to 6800 pF
325 ..... 326 ..... 345 ..... 346 .....
100 pF to 1.0 µF
1000 pF to 1.0 µF
362 ..... 365 .....
0.01 to 1.0 µF
2002 Oct 09
DataSheet4 U .com