S471Kxxxxxx Datasheet | Vishay

FEATURES - - - - - - - - - - Low losses High stability High capacitance in small size Kinked (preferred) or straight leads Lead (Pb)-free available e3 Ro HS PLIANT tangent line SH tangent line APPLICATIONS DC high voltage Pulse high voltage SMPS HV power supply HF ballast Capacitors with 5 mm (0.20 inch), 7.5 mm (0.30 inch) and 10 mm (0.40 inch) lead spacing DESIGN The capacitors consist of a ceramic disc both sides of which are silver-plated. Connection leads are made of tinned copper having a diameter of 0.6 mm or 0.8 mm up to 3 k V and 0.8 mm for 6 k V. The capacitors may be supplied with kinked or straight leads with a lead spacing of 5 mm (0.200"), 7.5 mm (0.300") or 10 mm (0.400") and a lead length from 4 to 30 mm. The standard tolerance on capacitance is 5 % or 10 % for class 1 capacitors and ± 10 % or ± 20 % for class 2 capacitors. Encapsulation is made of gold-coloured epoxy-resin, flammable resistant in accordance with “UL94V-0”. tangent line CAPACITANCE RANGE: Capacitors with 10 mm (0.40 inch) lead spacing Class 2 X5F - 55 to + 85 °C Class 1, at 1 MHz, 1.2 V (RMS); 10 to 220 p F 1 k Hz, 1 ± 0.2 V (RMS) for capacitance values higher than 1000 p F Class 2, at 1 k Hz, 1 ± 0.2 V (RMS); 100 to 22 000 p F RATED DC VOLTAGE: TEMPERATURE COEFFICIENTS: Class 1 SL0; S3N Class 2 X7R; Y5P; Z5U; Y5V; X5F 1 k V; 2 k V; 3 k V; 6 k V DIELECTRIC STRENGTH: 200 % of rated voltage SECTIONAL SPECIFICATIONS: Class 1 IEC 60 384-8, Class 2 IEC 60 384-9, EIA 198 INSULATION RESISTANCE AT 500 V (DC): ≥ 10 000 MΩ TOLERANCE ON CAPACITANCE: ± 5 %; ± 10 %; ± 20 %; + 80 /- 20 % Other tolerances available on request CLIMATIC CATEGORY: Class 1 SL0 55/125/21 Class 2 X7R 55/125/21 Class 2 Y5P; Z5U; Y5V 30/85/21 Class 2 X5F 55/85/21 DISSIPATION FACTOR: Class 1, C ≤ 30 p F; ≤ 20 x (10/C + 0.7) x 10-4 max. Class 1, C > 30 p F; ≤ 0.2 % Class 2, ≤ 3.0...