735P Datasheet | Vishay

FEATURES - Wire or lug terminals - High stability - High ripple to 30 amperes - Low inductance - Low ESR PERFORMANCE CHARACTERISTICS Operating Temperature: - 55°C to + 105°C. Capacitance Range: 1.0µF to 30.0µF. Capacitance Tolerance: ± 10%, ± 5%. DC Voltage Rating: 100 WVDC to 400 WVDC. Equivalent Series Resistance: 20k Hz to 100k Hz. Dissipation Factor: 0.1% maximum. Measure at 1000Hz @ + 25°C. DC Life Test: 140% of rated voltage for 1000 hours @ + 105°C. No visible damage. No open or short circuits. Maximum ∆ CAP ± 1.0%. Minimum IR = 50% of initial limit. Maximum DF = 0.10%. Humidity Test: 95% relative humidity @ + 40°C for 250 hours. No visible damage. Maximum ∆ CAP ± 1.0%. Maximum IR = 20% of initial limit. Maximum DF = 0.12%. ∆V/∆T: 10V/millisecond maximum. Voltage Test: 200% of rated voltage for 2 minutes. Insulation Resistance: Measure at 100 WVDC after a 2 minute charge. At + 25°C: 200,000 Megohm - Microfarads, or 400,000 Megohm minimum. Vibration Test (Condition B): No mechanical damage, short, open or intermittent circuits. PHYSICAL CHARACTERISTICS Pull Test: Wire Leads - 5 pounds (2.3 kilograms) for one minute. No physical damage. Terminal Lugs - 10 pounds (4.5 kilograms) for one minute. No physical damage. Lead Bend: After three plete consecutive bends, no damage. Marking: Sprague® trademark, type or part number, capacitance and voltage. DIMENSIONS in inches [millimeters] Terminal Style L 1.750 [44.45] Min. L 1.750 [44.45] Min. ± 0.062 [1.57] D Max. Tinned Solid Copper Wire- D Max. < 0.700 [17.78], No. 20 AWG wire 0.032 [0.812] nominal diameter. D Max. ≥ 0.700 [17.78], No. 18 AWG wire 0.040 [1.016] nominal diameter. Terminal Style H Tinned Solid Copper Lug L1 ± 0.062 [1.57] L2 ± 0.062 [1.57] 0.360 ± 0.005 [9.14 ± 0.13] D Max. ± 0.062 [1.57] 0.156 ± 0.005 Dia. [3.96 ± 0.13] 0.312 [7.9] Min. 0.032 ± 0.002 [0.81 ± 0.05] L1 = L + 0.766 [19.46] L2 = L + 0.437 [11.10] - Leads to be within ± 0.062" [1.57mm] of center line at egress but not...