900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Vishay Intertechnology Electronic Components Datasheet

SIC762CD Datasheet

Integrated DrMOS Power Stage

No Preview Available !

Integrated DrMOS Power Stage
SiC762CD
Vishay Siliconix
DESCRIPTION
The SiC762CD is an integrated solution that contains PWM
optimized n-channel MOSFETs (high side and low side) and
a full featured MOSFET driver IC. The device complies with
the Intel DrMOS standard for desktop and server Vcore power
stages. The SiC762CD delivers up to 35 A continuous output
current and operates from an input voltage range of 3 V to
27 V. The integrated MOSFETs are optimized for output
voltages in the ranges of 0.8 V to 2.0 V with a nominal input
voltage of 24 V. The device can also deliver very high power
at 5 V output for ASIC applications.
The SiC762CD incorporates an advanced MOSFET gate
driver IC. This IC accepts a single PWM input from the VR
controller and converts it into the high side and low side
MOSFET gate drive signals. The driver IC is designed to
implement the skip mode (SMOD) function for light load
efficiency improvement. Adaptive dead time control also
works to improve efficiency at all load points. The SiC762CD
has a thermal warning (THDN) that alerts the system of
excessive junction temperature. The driver IC includes an
enable pin, UVLO and shoot through protection.
The SiC762CD is optimized for high frequency buck
applications. Operating frequencies in excess of 1 MHz can
easily be achieved.
The SiC762CD is packaged in Vishay Siliconix high
performance PowerPAK MLP6 x 6 package. Compact
co-packaging of components helps to reduce stray
inductance, and hence increases efficiency.
SIC762CD APPLICATION DIAGRAMM
5V
FEATURES
• Integrated Gen III MOSFETs and DrMOS
compliant gate driver IC
• Enables Vcore switching at 1 MHz
• Easily achieve > 90 % efficiency in multi-phase,
low output voltage solutions
• Low ringing on the VSWH pin reduces EMI
• Pin compatible with DrMOS 6 x 6 version 3.0
• Tri-state PWM input function prevents negative output
voltage swing
• 5 V logic levels on PWM
• MOSFET threshold voltage optimized for 5 V driver bias
supply
• Automatic skip mode operation (SMOD) for light load
efficiency
• Under-voltage lockout
• Built-in bootstrap schottky diode
• Adaptive deadtime and shoot through protection
• Thermal shutdown warning flag
• Low profile, thermally enhanced PowerPAK® MLP 6 x 6
40 pin package
• Halogen-free according to IEC 61249-2-21 definition
Compliant to RoHS directive 2002/95/EC
www.DataSheet.net/
APPLICATIONS
• CPU and GPU core voltage regulation
• Server, computer, workstation, game console, graphics
boards, PC
VIN
VCIN
SMOD
DSBL#
PWM
THDN
SiC762CD
BOOT
VSWH
PHASE
VO
Document Number: 65727
S10-0275-Rev. A, 08-Feb-10
Figure 1
www.vishay.com
1
Datasheet pdf - http://www.DataSheet4U.co.kr/


Vishay Intertechnology Electronic Components Datasheet

SIC762CD Datasheet

Integrated DrMOS Power Stage

No Preview Available !

SiC762CD
Vishay Siliconix
ORDERING INFORMATION
Part Number
SiC762CD-T1-GE3
SiC762DB
Package
PowerPAK MLP66-40
Reference board
ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted
Parameter
Symbol
Min.
Input Voltage
Switch Node Voltage (DC)
VIN
VSW
- 0.3
- 0.3
Drive Input Voltage
Control Input Voltage
VDRV
VCIN
- 0.3
- 0.3
Logic Pins
Boot Voltage DC (referenced to CGND)
VPWM, VDSBL#,
VTHDN, VSMOD
VBS
- 0.3
- 0.3
Boot to Phase Voltage DC
Boot to Phase Voltage < 200 ns
VBS_PH
- 0.3
- 0.3
Ambient Temperature Range
Maximum Junction Temperature
Storage Junction Temperature
TA
TJ
TSTG
- 40
- 65
Soldering Peak Temperature
Note:
a. TA = 25 °C and all voltages referenced to PGND = CGND unless otherwise noted.
Max.
30
30
7.0
7.0
VCIN + 0.3
33
7
9
125
150
150
260
Unit
V
°C
www.DataSheet.net/
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is
not implied. Exposure to absolute maximum rating/conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Min.
Typ.
Max.
Unit
Input Voltage
VIN 3.0 12 24
Control Input Voltage
Drive Input Voltage
VCIN
VDRV
4.5
4.5
5.5
V
5.5
Switch Node
VSW_DC
12 24
Note:
a. Recommended operating conditions are specified over the entire temperature range, and all voltages referenced to PGND = CGND unless
otherwise noted.
THERMAL RESISTANCE RATINGS
Parameter
Maximum Power Dissipation at TPCB = 25 °C
Maximum Power Dissipation at TPCB = 100 °C
Thermal Resistance from Junction to Top
Thermal Resistance from Junction to PCB
Symbol
PD_25C
PD_100C
Rth_J_TOP
Rth_J_PCB
Typ.
Max.
25
10
15
5
Unit
W
°C/W
www.vishay.com
2
Document Number: 65727
S10-0275-Rev. A, 08-Feb-10
Datasheet pdf - http://www.DataSheet4U.co.kr/


Part Number SIC762CD
Description Integrated DrMOS Power Stage
Maker Vishay Siliconix
PDF Download

SIC762CD Datasheet PDF






Similar Datasheet

1 SIC762CD Integrated DrMOS Power Stage
Vishay Siliconix





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy