PTC5K-CH Datasheet | WAVELEnGTH

FEATURES AND BENEFITS - Drive up to ±2.5, ±5.0, or ±10.0 A of linear bipolar TEC or heater current - Add a booster unit to drive up to ±20.0 A - Single supply operation: 5 to 30 VDC - Small package: 3.0” x 3.2” x 1.1” - Use a wide variety of temperature sensors - Remote Output and Setpoint controls - Short term stability: 0.0012°C - Long term stability: 0.002°C - Selectable sensor bias current - Adjustable current limit - Failsafe Setpoint default in case of remote temperature setpoint signal error VERSATILE AND EASY TO USE The PTCx K-CH controllers operate from a single power supply between 5 V and 30 V. The linear bipolar controller drives a Peltier thermoelectric cooler or a resistive heater, and integrates easily into OEM applications. PTCx K-CH controllers interface with a variety of temperature sensors, and the bias current is adjustable in order to maximize controller sensitivity and stability. The pact chassis mount design simplifies heatsinking and requires minimal space. PTCx K-CH controllers are quick to configure for your prototype project, and there are no surprises when it’s time to integrate the controller into the final design. CONTENTS QUICK CONNECT GUIDE PIN DESCRIPTIONS ELECTRICAL SPECIFICATIONS SAFETY INFORMATION OPERATING INSTRUCTIONS ADDITIONAL TECH NOTES TROUBLESHOOTING CABLE SPECIFICATIONS MECHANICAL SPECIFICATIONS CERTIFICATION AND WARRANTY PAGE 2 3 4 5 6 14 17 19 20 21 ORDERING INFORMATION PART NO PTC2.5K-CH PTC5K-CH PTC10K-CH PTC10K-SL WCB105 WCB106 WCB107 WCB501 USBKIT DESCRIPTION ±2.5 A Temperature Controller ±5.0 A Temperature Controller ±10.0 A Temperature Controller ±10.0 A Booster Unit Sensor Cable (included) Input / Output Cable (included) Power / TEC Cable Master / Booster Cable USB Interface kit, with software pliant e Pb Ro HS 406-587-4910 Applies to Product Revisions A - E .team Wavelength. © November 2013 PTC K-CH TEMPERATURE CONTROLLER QUICK CONNECT GUIDE TO ENSURE SAFE OPERATION OF THE PTCXK-CH ! CONTROLLER, IT IS...