WJA1005 Datasheet | WJ Communication

Features - - - - - - - - 50 - 4000 MHz 18 d B Gain +19 d Bm P1d B +35 d Bm OIP3 +5V Single Voltage Supply Internal Active Bias Supply Internally matched to 50 Ω Lead-free / Ro HS-pliant / Green SOT-89 package Product Description The WJA1005 is a high performance amplifier that offers high linearity in a low-cost surface-mount package. At 900 MHz, the WJA1005 typically provides 18 d B gain, +35 d Bm OIP3, and +19 d Bm P1d B. The device is housed in a lead-free/green/Ro HS-pliant SOT-89 industry-standard SMT package using a Ni Pd Au plating to eliminate the possibility of tin whiskering. Functional Diagram GND 4 2 GND 3 RF OUT Applications - - - - GSM, PCS, CDMA, WCDMA Repeaters, BTS Transceivers UHF General Purpose The WJA1005 consists of Darlington pair amplifiers using a high reliability In Ga P/Ga As HBT process technology. The MMIC amplifier is internally matched to 50Ω and only requires DC-blocking capacitors and an inductive RF choke for operation. An internal active bias is designed to enable stable performance over temperature. It also eliminates the need for a dropping bias resistor and allows the device to be biased directly from a +5V supply voltage. The amplifier is targeted for high performance RF applications in existing and next generation wireless technologies. In addition, the WJA1005 will work for various other applications within the 50 to 4000 MHz frequency range. RF IN Function Input Output/Bias Ground Pin No. 1 3 2, 4 Specifications Parameter Operational Bandwidth Test Frequency Gain Input Return Loss Output Return Loss Output P1d B Output IP3 (2) Noise Figure Device Voltage Device Current Typical Performance Units MHz MHz d B d B d B d Bm d Bm d B V m A Min Typ 900 17.9 14 9.5 +19.1 +35 4.0 5 63 Max Parameter Frequency S21 S11 S22 Output P1d B Output IP3 (2) Noise Figure Units MHz d B d B d B d Bm d Bm d B 500 18.8 -18 -13 +19.8 +37.5 3.9 Typical 900 17.9 -14 -9.5 +19.1 +35 4.0 1900 15.3 -9.4 -6.1 +15.8 +25.9 5.0 2140 14.7 -9 -5.9 +14.9 +24.8...