900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






WJ Communication

WJA1015 Datasheet Preview

WJA1015 Datasheet

5V Active-Bias InGaP HBT Gain Block

No Preview Available !

WJA1015www.DataSheet4U.com
+5V Active-Bias InGaP HBT Gain Block
Product Features
50 – 4000 MHz
14 dB Gain
+19.5 dBm P1dB
+35.5 dBm OIP3
+5V Single Voltage Supply
Internal Active Bias Supply
Internally matched to 50 Ω
Lead-free / RoHS-compliant /
Green SOT-89 package
Applications
GSM, PCS, CDMA, WCDMA
Repeaters, BTS Transceivers
UHF
General Purpose
Product Description
Functional Diagram
The WJA1015 is a high performance amplifier that offers
high linearity in a low-cost surface-mount package. At 900
MHz, the WJA1015 typically provides 14 dB gain, +35.5
dBm OIP3, and +19.5 dBm P1dB. The device is housed in
a lead-free/green/RoHS-compliant SOT-89 industry-
standard SMT package using a NiPdAu plating to eliminate
the possibility of tin whiskering.
The WJA1015 consists of Darlington pair amplifiers using
a high reliability InGaP/GaAs HBT process technology.
The MMIC amplifier is internally matched to 50and only
requires DC-blocking capacitors and an inductive RF choke
for operation. An internal active bias is designed to enable
stable performance over temperature. It also eliminates the
need for a dropping bias resistor and allows the device to
be biased directly from a +5V supply voltage.
GND
4
1
RF IN
2
GND
3
RF OUT
Function
Input
Output/Bias
Ground
Pin No.
1
3
2, 4
The amplifier is targeted for high performance RF applications
in existing and next generation wireless technologies. In
addition, the WJA1015 will work for various other
applications within the 50 to 4000 MHz frequency range.
Specifications
Parameter
Operational Bandwidth
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 (2)
Noise Figure
Device Voltage
Device Current
Units
MHz
MHz
dB
dB
dB
dBm
dBm
dB
V
mA
Min
50
Typ
900
14.1
11
11
+19.4
+35.5
4.5
5
67
Max
4000
1. Test conditions: 25 ºC, Supply Voltage = +5 V, 50 Ω System.
2. 3OIP measured with two tones at an output power of 0 dBm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Typical Performance
Parameter
Frequency
S21
S11
S22
Output P1dB
Output IP3 (2)
Noise Figure
Units
MHz
dB
dB
dB
dBm
dBm
dB
500
14.4
-12
-14
+19.5
+39.4
4.4
Typical
900 1900
14.1 13.2
-11 -7.7
-11 -7
+19.4 +17.4
+35.5 +26.8
4.5 4.9
2140
13
-7.2
-6.7
+16.6
+26.3
5.0
Absolute Maximum Rating
Ordering Information
Parameter
Operating Case Temperature
Storage Temperature
Rating
-40 to +85 °C
-55 to +150 °C
Part No.
WJA1015
WJA1015-PCB
Description
+5V Active Bias InGaP HBT Gain Block
(lead-free/green/RoHS-compliant SOT-89 Package)
500 – 2400 MHz Fully Assembled Eval. Board
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com
Page 1 of 4 May 2007




WJ Communication

WJA1015 Datasheet Preview

WJA1015 Datasheet

5V Active-Bias InGaP HBT Gain Block

No Preview Available !

WJA1015
+5V Active-Bias InGaP HBT Gain Block
Typical Device RF Performance
Supply Bias = +5 V, Icc = 67 mA
1. Test conditions: T = 25 ºC, Supply Voltage = +5 V, Icc = 67 mA typical, 50 Ω System.
2. 3OIP measured with two tones at an output power of 0 dBm/tone separated by 1 MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
40
35
30
25
20
500
18
16
14
12
10
0
OIP3 vs. Frequency
Pout=0 dBm/tone
Gainvs. Frequency
T=25°C
Return Loss
0 T=25°C
-5
-10
-15
1000 2000
Frequency (MHz)
6
-20
S11 S22
-25
3000 4000 0
1000 2000
Frequency (MHz)
Noise Figure vs. Frequency
T=25°C
16
3000
4000
Gainvs. Pout
f=900 MHz
5 14
4 12
3 10
+25C
28
1000
1500
2000
2500 0
500 1000 1500 2000 2500 10
12
14
16
18
20
Frequency (MHz)
Frequency (MHz)
Pout (dBm)
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com
Page 2 of 4 May 2007


Part Number WJA1015
Description 5V Active-Bias InGaP HBT Gain Block
Maker WJ Communication
PDF Download

WJA1015 Datasheet PDF






Similar Datasheet

1 WJA1010 5V Active-Bias InGaP HBT Gain Block
WJ Communication
2 WJA1010 Active-Bias InGaP HBT Gain Block
TriQuint Semiconductor
3 WJA1015 5V Active-Bias InGaP HBT Gain Block
WJ Communication
4 WJA1015 Active-Bias InGaP HBT Gain Block
TriQuint Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy