900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






WJ Communication

WJA1510 Datasheet Preview

WJA1510 Datasheet

5V Active-Bias InGaP HBT Gain Block

No Preview Available !

WJA1510www.DataSheet4U.com
+5V Active-Bias InGaP HBT Gain Block
Product Features
50 – 1000 MHz
15 dB Gain
+20 dBm P1dB
+43 dBm OIP3
+5V Single Voltage Supply
Internal Active Bias Supply
Internally matched to 50 Ω
Lead-free / RoHS-compliant /
Green SOT-89 package
Applications
IF Amplifier
Repeaters, BTS Transceivers
VHF/UHF
Wireless Infrastructure
General Purpose
Product Description
Functional Diagram
The WJA1510 is a high performance amplifier that offers
high linearity in a low-cost surface-mount package. At 200
MHz, the WJA1510 typically provides 15 dB gain, +43
dBm OIP3, and +20 dBm P1dB. The device is housed in a
lead-free/green/RoHS-compliant SOT-89 industry-standard
SMT package using a NiPdAu plating to eliminate the
possibility of tin whiskering.
The WJA1510 consists of Darlington pair amplifiers using
a high reliability InGaP/GaAs HBT process technology.
The MMIC amplifier is internally matched to 50and only
requires DC-blocking capacitors and an inductive RF choke
for operation. Biased directly from a 5V supply, an internal
active bias network enables stable operation over
temperature, eliminating the need for the typical dropping
bias resistor.
GND
4
1
RF IN
2
GND
3
RF OUT
Function
Input
Output/Bias
Ground
Pin No.
1
3
2, 4
The amplifier is targeted for high performance IF applications
in existing and next generation wireless technologies. In
addition, the WJA1510 will work for various other
applications within the 50 to 1000 MHz frequency range.
.
Specifications
Parameter
Operational Bandwidth
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 (2)
Noise Figure
Device Voltage
Device Current
Units
MHz
MHz
dB
dB
dB
dBm
dBm
dB
V
mA
Min
50
Typ
200
14.6
13
16
+20
+43
4.5
5
97
Max
1000
1. Test conditions: 25 ºC, Supply Voltage = +5 V, 50 Ω System.
2. 3OIP measured with two tones at an output power of 0 dBm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Typical Performance
Parameter
Frequency
S21
S11
S22
Output P1dB
Output IP3 (2)
Noise Figure
Units
MHz
dB
dB
dB
dBm
dBm
dB
50
15.5
-13
-15
+20
+44.5
4.7
Typical
100 200
15 14.6
-13 -13
-16 -16
+20 +20
+44.5 +43
4.5 4.5
500
14.3
-12
-14
+20
+42
4.6
Absolute Maximum Rating
Ordering Information
Parameter
Operating Case Temperature
Storage Temperature
Rating
-40 to +85 °C
-55 to +150 °C
Part No.
WJA1510
WJA1510-PCB
Description
+5V Active Bias InGaP HBT Gain Block
(lead-free/green/RoHS-compliant SOT-89 Package)
50 – 1000 MHz Fully Assembled Eval. Board
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com
Page 1 of 4 May 2007




WJ Communication

WJA1510 Datasheet Preview

WJA1510 Datasheet

5V Active-Bias InGaP HBT Gain Block

No Preview Available !

WJA1510
+5V Active-Bias InGaP HBT Gain Block
Typical Device RF Performance
Supply Bias = +5 V, Icc = 97 mA
1. Test conditions: T = 25 ºC, Supply Voltage = +5 V, Icc = 97 mA typical, 50 Ω System.
2. 3OIP measured with two tones at an output power of 0 dBm/tone separated by 1 MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
18
16
14
12
10
0
100
Gainvs. Frequency
T=25°C
0
-5
-10
-15
-20
200 400 600
Frequency (MHz)
-25
800 1000
0
Icc vs. Temperature
Vcc = +5V
6
Return Loss
T=25°C
S11 S22
200 400 600
Frequency (MHz)
800
Noise Figure vs. Frequency
T=25°C
50
45
40
35
30
25
1000 0
18
OIP3 vs. Frequency
Pout=6dBm/tone
+25C -40C +85C
200 400 600 800 1000
Frequency (MHz)
Gainvs. Pout
f=200 MHz
98 5 16
96 4 14
94 3 12
92 2 10
-50 -25 0 25 50 75 100 0 200 400 600 800 1000 10 12 14 16 18 20
Temperature (°C)
Frequency (MHz)
Pout (dBm)
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com
Page 2 of 4 May 2007


Part Number WJA1510
Description 5V Active-Bias InGaP HBT Gain Block
Maker WJ Communication
PDF Download

WJA1510 Datasheet PDF





Similar Datasheet

1 WJA1510 5V Active-Bias InGaP HBT Gain Block
WJ Communication
2 WJA1515 5V Active-Bias InGaP HBT Gain Block
WJ Communication





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy