900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






WJ Communications

WJR7090 Datasheet Preview

WJR7090 Datasheet

Multi Protocol RFID Reader Module

No Preview Available !

www.DataSheet4U.com
WJR7090 - Korea 한국
Multi-Protocol RFID Reader Module
Gen1, ISO 18000-6B and ISO 18000-6C (UHFGen2)
Product Features
Compliant to Global Standards
Class1 Gen1
ISO 18000-6B
ISO 18000-6C (UHF Gen2)
Designed for Korean Market*
1W Transmit Power (+30 dBm)
Antenna Ports
Single Antenna Operation
Switchable to 2 Separate Antennas
50MMCX Coaxial Connectors
PCMCIA Type II Form Factor
Serial Interface 3.3V CMOS Levels, 5V tolerant
*Pending certification
Highly Scalable
WJ Communications’ WJR7090 RFID multi-protocol reader
module is designed specifically for the Korean market.
Operating at the UHF frequency, this product offers OEMs
and System Integrators the ability to deliver highly reliable,
best-in-class, high performing RFID enabled printers, RFID
handhelds and other RFID enabled devices. The
WJR7090 reader module supports Class1, Gen1, ISO
18000-6B, and ISO 18000-6C (UHF Gen2) international
standards and meets the requirements to operate in Gen2
Multiple Reader Environment (MRE) mode.
Superior Performance
WJ’s innovative, cost-effective and easy to integrate reader
module delivers a full 1 watt of RF power and boasts two
antenna ports with the flexibility to customize RFID devices
to meet application specific needs. Typical applications for
the WJR7090 include Handheld RFID Readers, RFID
Enabled Printers, Fork Lift Readers, Portal Readers, and
Mobile RFID devices.
Ease of Integration
The WJR7090 is packaged in a PCMCIA Type II PC
Card™ form factor with serial interface, for ease of
integration into various RFID devices.
WJ Communications 401 River Oaks Parkway, San Jose, CA 95134 WWW.WJ.COM




WJ Communications

WJR7090 Datasheet Preview

WJR7090 Datasheet

Multi Protocol RFID Reader Module

No Preview Available !

www.DataSheet4U.com
WJR7090 - Korea 한국
Multi-Protocol RFID Reader Module
Gen1, ISO 18000-6B and ISO 18000-6C (UHF Gen2)
Absolute Maximum Rating*
Parameter
ESD Protection (per ISO 7816-1)
Maximum Operating Voltage
Operating Case Temperature
Storage Temperature
Rating
2
6
-20 to +55
-40 to +65
Units
KV
V
°C
°C
*Operation of this device above any of these parameters may cause permanent damage.
Specifications
Operating Conditions: Vcc = 5.00 VDC, TAMB = 25°C, 50 System.
Symbol Parameter
fRFID
fCH
CH
VCC
IPEAK OP
PTX-Max
PRANGE
TOPERATING
Sf
RF Frequency—UHF Operation
Channel Spacing
Frequency Hopping Channels (See Hop Frequency
Channels Table below)
Supply Voltage @ 1.3A, Connected to System*
Peak Operating Current
Maximum Transmit Power
Power Control Range
Step Size
Operating Temperature Range
Frequency Stability
Min
910
Typ
200
15
Ma
x
914
4.900
-20
5.00
1.1
+29.6
12
1
5.5
1.3
+30
+50
±10
Units
MHz
kHz
Channels
V
A
dBm
dB
dB
°C
ppm
*Measured at connector for 1.3A load.
Copyright WJ Communications June 2006. Subject to change without notice.
All trademarks, trade names, service marks, and logos remain the property of the rightful owners
WJ Communications 401 River Oaks Parkway, San Jose, CA 95134 WWW.WJ.COM


Part Number WJR7090
Description Multi Protocol RFID Reader Module
Maker WJ Communications
PDF Download

WJR7090 Datasheet PDF






Similar Datasheet

1 WJR7090 Multi Protocol RFID Reader Module
WJ Communications





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy