®
WON-TOP ELECTRONICS
Features
Glass Passivated Die Construction
30000W Peak Pulse Power Dissipation
28V – 288V Standoff Voltage
Uni- and Bi-Directional Versions Available
Excellent Clamping Voltage
Typical Response Time < 1nS
Plastic Case Material has UL Flammability
Classification Rating 94V-0
Mechanical Data
Case: P-600, Molded Plastic
Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
Polarity: Cathode Band Except Bi-Directional
Weight: 2.10 grams (approx.)
Mounting Position: Any
Marking: Type Number
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 5
30KP SERIES
30000W TRANSIENT VOLTAGE SUPPRESSOR
Pb
ABA
D
P-600
Dim Min Max
A 25.4 —
B 8.60 9.10
C 1.20 1.30
D 8.60 9.10
All Dimensions in mm
C
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Characteristic
Peak Pulse Power Dissipation on 10/1000µS Waveform (Note 1, 2, 4)
Peak Pulse Current on 10/1000µS Waveform (Note 1)
Peak Forward Surge Current (Note 2, 3)
Power Dissipation at TL = 75°C (Note 2)
Typical Thermal Resistance, Junction to Ambient (Note 2)
Typical Thermal Resistance, Junction to Lead (Note 2)
Operating and Storage Temperature Range
Symbol
PPPM
IPPM
IFSM
PD
R JA
R JL
TJ, TSTG
Value
30000
See Table 1
400
8.0
40
8.0
-55 to +150
Unit
W
A
A
W
°C/W
°C
Note: 1. Non-repetitive current pulse per Figure 5 and derated above TA = 25°C per Figure 1.
2. Mounted on 20 x 20 x 1.0mm thick copper pads to each terminal that maintained at a distance of 9.5mm from the case.
3. Measured on 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum. For uni-directional devices only.
4. Peak pulse power waveform is 10/1000µS.
© Won-Top Electronics Co., Ltd.
Revision: February, 2014
www.wontop.com
1
