Low Forward Voltage Drop
High Current Capability
High Surge Current Capability
MR750 – MR7510
6.0A STANDARD DIODE
Case: P-600, Molded Plastic
Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
Polarity: Cathode Band
Weight: 2.1 grams (approx.)
Mounting Position: Any
Marking: Type Number
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
Dim Min Max
A 25.4 —
B 8.60 9.10
C 1.20 1.30
D 8.60 9.10
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
50 100 200 400 600 800 1000 V
RMS Reverse Voltage
70 140 280 420 560 700 V
Average Rectified Output Current (Note 1) @TA = 60°C
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on
Rated Load (JEDEC Method)
Peak Reverse Current
At Rated DC Blocking Voltage
Typical Junction Capacitance (Note 2)
@IF = 6.0A
@TA = 25°C
@TA = 100°C
Typical Thermal Resistance Junction to Ambient (Note 3)
Typical Thermal Resistance Junction to Lead (Note 3)
Operating and Storage Temperature Range
-50 to +150
Note: 1. Leads maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0V D.C.
3. Mounted on FR-4 PCB with 30mm x 30mm copper pad.
© Won-Top Electronics Co., Ltd.
Revision: September, 2012