BT234X-600D Datasheet | WeEn

4Q Triac Rev.01 - 6 August 2018 Product data sheet 1. General description Planar passivated four quadrant triac in a SOT186A (TO-220F) "full pack" plastic package intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. This very sensitive gate "series D" triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits. 2. Features and benefits - Direct triggering from low power drivers and logic ICs - High blocking voltage capability - Isolated package - Low holding current for small load currents and lowest EMI at mutation - Planar passivated for voltage ruggedness and reliability - Triggering in all four quadrants - Very sensitive gate for easy logic level triggering 3. Applications - General purpose phase control - General purpose switching 4. Quick reference data Table 1. Quick reference data Symbol Parameter Conditions VDRM repetitive peak off-state voltage ITSM IT(RMS) non-repetitive peak onstate current RMS on-state current full sine wave; Tj(init) = 25 °C; tp = 20 ms; Fig. 4; Fig. 5 full sine wave; Th ≤ 98 °C; Fig. 1; Fig. 2; Fig. 3 Static characteristics IGT gate trigger current VD = 12 V; IT = 0.1 A; T2+ G+; Tj = 25 °C; Fig. 7 VD = 12 V; IT = 0.1 A; T2+ G-; Tj = 25 °C; Fig. 7 VD = 12 V; IT = 0.1 A; T2- G-; Tj = 25 °C; Fig. 7 VD = 12 V; IT = 0.1 A; T2- G+; Tj = 25 °C; Fig....