W528S30
Overview
The W528Sxx family is programmable speech synthesis ICs that utilize the ADPCM coding method to generate all types of voice effects. The W528Sxx's LOAD and JUMP commands and four programmable registers provide powerful userprogrammable functions that make this chip suitable for an extremely wide range of speech IC applications.
- Programmable speech synthesizer
- Wide operating voltage range: 2.4 to 5.5 volts
- 4-bit ADPCM synthesis method
- Provides 4 direct trigger inputs that can easily be extended to 8 or 12 matrix trigger inputs
- Two trigger input debounce times (20 to 40 mS or 160 to 320 µS) can be set
- Provides up to 2 LEDs and 3 STOP outputs
- Every LED pin can drive 3 LEDs simultaneously
- LED flash frequency: 3 Hz
- AUD output current: 5 mA
- Flexible functions programmable through the following: - LD (load), JP (jump) commands - Four registers: R0, EN, STOP, and MODE - Conditional instructions - Speech equation - END instruction - Global repeat (GR) setting - Output frequency and LED flash type setting
