Datasheet4U Logo Datasheet4U.com

WSH41S - Hall Effect Sensor IC

Description

WSH41S is designed to integrate Hall sensor with complementary output drivers and speed control function together on one chip, it is suitable for speed measurement, revolution counting, positioning, and DC brushless motors.

Features

  • Operate from 2.8V to 20V supply voltage. On-chip Hall sensor. Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range. High output sinking capability up to 600mA for driving large load. Lower current change rate reduces the peak output voltages during switching. Available in rugged low profile SOT-25 packages. PS pin can accept PWM signal to program rotation speed. Built-in protection diode for reverse power supply fault. Built-in thermal lock pro.

📥 Download Datasheet

Datasheet Details

Part number WSH41S
Manufacturer Winson Semiconductor
File Size 434.66 KB
Description Hall Effect Sensor IC
Datasheet download datasheet WSH41S Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
WSH416 Hall Effect Sensor Winson
WSH432 MOSFET ETC
WSH132 Unipolar Hall Effect Switch Winson
WSH136 Linear Hall Effect Sensor Winson
WSH137 Linear Hall Effect Sensor Winson

Other Datasheets by Winson Semiconductor

Part Number Description
WSH410 Hall Effect Sensor IC with Complementary Output Drivers and Frequency Generator
WSH411 Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function
WSH412 Hall Effect Sensor
WSH413 Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function
WSH415 Hall Effect

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com WSH41S Hall Effect Sensor IC with Thermal Lock Protection ,Auto Restart and Speed Control Function Features: Operate from 2.8V to 20V supply voltage. On-chip Hall sensor. Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range. High output sinking capability up to 600mA for driving large load. Lower current change rate reduces the peak output voltages during switching. Available in rugged low profile SOT-25 packages. PS pin can accept PWM signal to program rotation speed. Built-in protection diode for reverse power supply fault. Built-in thermal lock protection and auto-restart function.
Published: |