Datasheet4U Logo Datasheet4U.com

WSH42FB - Single Coil Hall Effect IC with Thermal Lock Protection and Auto-Restart

Description

WSH42FB is designed to integrate Hall sensor with two push-pull output drivers and frequency generator together on the same chip, it is suitable for single coil DC brushless motors.

Features

  • Operate from 2.8V to 14V supply voltage. On-chip Hall sensor. Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range. Output sinking capability up to 350mA for driving large load. Lower current change rate reduces the peak output voltages during switching. Available in rugged low profile SIP-4L,SIP-5L and SOT-25 packages. Built-in Frequency Generator. Built-in protection diode for reverse power supply fault. Prevent the fail situation during lock.

📥 Download Datasheet

Datasheet Details

Part number WSH42FB
Manufacturer Winson Semiconductor
File Size 308.40 KB
Description Single Coil Hall Effect IC with Thermal Lock Protection and Auto-Restart
Datasheet download datasheet WSH42FB Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
WSH416 Hall Effect Sensor Winson
WSH432 MOSFET ETC
WSH132 Unipolar Hall Effect Switch Winson
WSH136 Linear Hall Effect Sensor Winson
WSH137 Linear Hall Effect Sensor Winson

Other Datasheets by Winson Semiconductor

Part Number Description
WSH420 Single Coil Hall Effect IC with Thermal Lock Protection and Auto-Restart
WSH410 Hall Effect Sensor IC with Complementary Output Drivers and Frequency Generator
WSH411 Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function
WSH412 Hall Effect Sensor
WSH413 Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com WSH42FB Single Coil Hall Effect IC with Thermal Lock Protection and Auto-Restart Features: Operate from 2.8V to 14V supply voltage. On-chip Hall sensor. Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range. Output sinking capability up to 350mA for driving large load. Lower current change rate reduces the peak output voltages during switching. Available in rugged low profile SIP-4L,SIP-5L and SOT-25 packages. Built-in Frequency Generator. Built-in protection diode for reverse power supply fault. Prevent the fail situation during lock status or high temperature Built-in thermal lock protection and auto-restart function. General Description: www.DataSheet4U.