Datasheet4U Logo Datasheet4U.com

WM8196 - (8 + 8) Bit Output 16-bit CIS/CCD AFE/Digitiser

Description

The WM8196 is a 16-bit analogue front end/digitiser IC which processes and digitises the analogue output signals from CCD sensors or Contact Image Sensors (CIS) at pixel sample rates of up to 12MSPS.

Features

  • 16-bit ADC 12MSPS conversion rate Low power.
  • 320mW typical 5V single supply or 5V/3.3V dual supply operation Single or 3 channel operation Correlated double sampling Programmable gain (8-bit resolution) Programmable offset adjust (8-bit resolution) Programmable clamp voltage 8 or 4-bit wide multiplexed data output formats Internally generated voltage referenc.

📥 Download Datasheet

Datasheet Details

Part number WM8196
Manufacturer Wolfson Microelectronics
File Size 389.53 KB
Description (8 + 8) Bit Output 16-bit CIS/CCD AFE/Digitiser
Datasheet download datasheet WM8196 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
WM8190 (8+6) Bit Output 14-bit CIS/CCD AFE/Digitiser Wolfson Microelectronics plc
WM8191 14-bit 6MSPS CIS/CCD Analogue Front End/Digitiser Wolfson Microelectronics plc
WM8192 (8+8) Bit Output 16-bit CIS/CCD AFE/Digitiser Wolfson Microelectronics plc
WM8198 (8 + 8 ) BIT OUTPUT 16 BIT CIS/CCD AFE/DIGITISER Wolfson Microelectronics plc
WM8199 20MSPS 16-bit CCD Digitiser Cirrus Logic

Other Datasheets by Wolfson Microelectronics

Part Number Description
WM8195 14-bit 12MSPS CIS/CCD Analogue Front End/Digitiser
WM8144-12 Integrated 12-bit Data Acquisition System
WM8152 Single Channel 16-bit CIS/CCD AFE
WM8200 40MSPS ADC
WM8200-10 40MSPS ADC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
w DESCRIPTION The WM8196 is a 16-bit analogue front end/digitiser IC which processes and digitises the analogue output signals from CCD sensors or Contact Image Sensors (CIS) at pixel sample rates of up to 12MSPS. The device includes three analogue signal processing channels each of which contains Reset Level Clamping, Correlated Double Sampling and Programmable Gain and Offset adjust functions. Three multiplexers allow single channel processing. The output from each of these channels is time multiplexed into a single high-speed 16-bit Analogue to Digital Converter. The digital output data is available in 8 or 4-bit wide multiplexed format. An internal 4-bit DAC is supplied for internal reference level generation.
Published: |