Datasheet4U Logo Datasheet4U.com

WM8524 - 24-bit 192kHz Stereo DAC

Description

The WM8524 is a stereo DAC with integral charge pump and hardware control interface.

This provides 2Vrms line driver outputs using a single 3.3V power supply rail.

Features

  • ground-referenced outputs and the use of a DC servo to eliminate the need for line driving coupling capacitors and effectively eliminate power on pops and clicks. The device is controlled and configured via a hardware control interface. The device supports all common audio sampling rates between 8kHz and 192kHz using all common MCLK fs rates. The audio interface operates in slave mode. The WM8524 has a 3.3V tolerant digital interface, allowing logic up to 3.3V to be connected. The device is avai.

📥 Download Datasheet

Datasheet Details

Part number WM8524
Manufacturer Wolfson Microelectronics
File Size 287.87 KB
Description 24-bit 192kHz Stereo DAC
Datasheet download datasheet WM8524 Datasheet

📁 Similar Datasheet

  • WM8521 - STEREO DAC (Wolfson Microelectronics plc)
  • WM8523 - 24-bit 192kHz Stereo DAC (Cirrus Logic)
  • WM8505 - Application Processor (WonderMedia)
  • WM8510 - MONO CODEC (Wolfson Microelectronics plc)
  • WM8141 - 12-bit 6MSPS CIS/CCD Analogue Front End/Digitiser (Wolfson Microelectronics plc)
  • WM8143-10 - 10-bit/6MSPS CCD Signal Processor (Wolfson Microelectronics plc)
  • WM8143-12 - 12-bit/4MSPS CCD Signal Processor (Wolfson Microelectronics plc)
  • WM8144-10 - Integrated 10-bit Data Acquisition system for Imaging Applications (Wolfson Microelectronics plc)
  • WM8146 - 12-bit(8+4-bit) Linear Sensor Image Processor (Wolfson Microelectronics plc)
  • WM8148 - 12-bit/12MSPS CCD/CIS Analogue Front End/Digitiser (Wolfson Microelectronics plc)
Other Datasheets by Wolfson Microelectronics

Full PDF Text Transcription

Click to expand full text
w WM8524 24-bit 192kHz Stereo DAC with 2Vrms Ground Referenced Line Output DESCRIPTION The WM8524 is a stereo DAC with integral charge pump and hardware control interface. This provides 2Vrms line driver outputs using a single 3.3V power supply rail. The device features ground-referenced outputs and the use of a DC servo to eliminate the need for line driving coupling capacitors and effectively eliminate power on pops and clicks. The device is controlled and configured via a hardware control interface. The device supports all common audio sampling rates between 8kHz and 192kHz using all common MCLK fs rates. The audio interface operates in slave mode. The WM8524 has a 3.3V tolerant digital interface, allowing logic up to 3.3V to be connected. The device is available in a 16-pin TSSOP.
Published: |