CPW3-0600-S004B Datasheet | Wolfspeed

Description This is the 3rd generation of high voltage, high performance Z-Rec© silicon carbide Schottky diode in a packageless bare die format to be implemented into any custom module design. The lower forward voltage, smaller reverse leakage current, zero reverse recovery, and high thermal conductivity make this Schottky diode ideal for high frequency switching applications including solar inverters and UPS. This Schottky diode can be used in conjunction with either IGBT or MOSFET as an anti-parallel diode, or as a rectifier. Features - 600V Schottky Rectifier - Zero Reverse Recovery - Zero Forward Recovery - High-Frequency Operation - Temperature-Independent Switching Behavior - Extremely Fast Switching - Positive Temperature Coefficient on VF Package Type: Bare Die PN’s: CPW3-0600-S004B Applications - Switch mode power supply - Solar inverter - Power Correction - UPS Absolute Maximum Ratings Stress beyond those listed under absolute maximum ratings may damage the device. Parameter Symbol Rating Repetitive Peak Reverse Voltage VRRM Continuous Forward Current Repetitive Peak Forward Surge Current, assumes tp = 10ms, Half Sine Wave Pulse Virtual Junction and Storage Temperature Tc = 175°C 4 IFRM Tc = 25°C 22 TVJ, Tstg -55 to +175 Maximum Processing Temperature, in non-reactive ambient Tproc Note: All above notation to Tc specifies case temperature from die packaged in TO-247, with Rth(j-c) < 2.02°C/W Unit V A A °C °C Rev. 02, Sept 2023 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 | wolfspeed./power © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed,...