XA2100 - Step-up DC-DC Converter

Key Features

Low input current：6µA(Type)；.
Low ripple and low noise；.
Operating voltage range：0.9V~6.5V；.
Output voltage range：2.0V~7.0V(step 0.1V)；.
Output voltage accuracy：±2.5%；.
Output Current：if Vin=3.0V and Vout=3.3V，then Iout=300mA；.
Low start voltage：≤0.9V(at Iout=1mA.

XA2100 step-up dc-dc converter by XINNA SEMI - Datasheet Preview

Datasheet Details

Part number	XA2100
Manufacturer	XINNA SEMI
File Size	1.81 MB
Description	Step-up DC-DC Converter
Datasheet	XA2100 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
XA214-G4C	medium-power FET	XINLUDA
XA2001	Low Speed USB Micro-controller	Sino Wealth

Other Datasheets by XINNA SEMI

Part Number	Description
XA2317	Synchronous Boost DC/DC Regulator
XA2320	Regulated Charge Pump DC/DC Converter
XA2320B	Regulated Charge Pump DC/DC Converter
XA2361	PFM Step-Up DC-DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

XA2100 XA2100 Series Step-up DC-DC Converter XA2100 Series is a PFM Step-up DC/DC converter IC with low supply current by CMOS process. High frequency noise that occurs during switching is reduced by using advanced circuit designed, output voltage is programmable in 0.1V steps between 2.0~7.0V and maximum frequency is 100KHz(Typ.). A low ripple, high efficiency step-up DC/DC converter can be constructed of XA2100X xx with only three external components. Also available is a CE(chip enable) function that reduce power dissipation During shut-down mode. XA2100Xxx is suitable for use with battery-powered instruments with low noise and low supply current. Features • Low input current：6µA(Type)； • Low ripple and low noise； • Operating voltage range：0.9V~6.