X5045 Overview
These devices bine four popular functions, Poweron Reset Control, Watchdog Timer, Supply Voltage Supervision, and Block Lock Protect Serial EEPROM Memory in one package. This bination lowers system cost, reduces board space requirements, and increases reliability. Applying power to the device activates the power on reset circuit which holds RESET/RESET active for a period of time.
X5045 Key Features
- Selectable time out watchdog timer
- Low VCC detection and reset assertion -Five standard reset threshold voltages -Re-program low VCC reset threshold voltag
- Long battery life with low power consumption -<50µA max standby current, watchdog on -<10µA max standby current, watchdo
- 2.7V to 5.5V and 4.5V to 5.5V power supply versions
- 4Kbits of EEPROM-1M write cycle endurance
- Save critical data with Block Lock™ memory -Protect 1/4, 1/2, all or none of EEPROM array
- Built-in inadvertent write protection -Write enable latch -Write protect pin
- 3.3MHz clock rate
- Minimize programming time -16-byte page write mode -Self-timed write cycle -5ms write cycle time (typical)
- SPI modes (0,0 & 1,1)
