900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Xilinx

XC4VLX100 Datasheet Preview

XC4VLX100 Datasheet

(XC4VL(s)X15 - XC4VL(s)X200) FPGA (Field-Programmable Gate Array)

No Preview Available !

0
R Virtex-4 FPGA Data Sheet:
DC and Switching Characteristics
DS302 (v3.2) April 10, 2008
0 0 Product Specification
Virtex-4 FPGA Electrical Characteristics
Virtex®-4 FPGAs are available in -12, -11, and -10 speed
grades, with -12 having the highest performance.
Virtex-4 FPGA DC and AC characteristics are specified for
both commercial and industrial grades. Except the operat-
ing temperature range or unless otherwise noted, all the DC
and AC electrical parameters are the same for a particular
speed grade (that is, the timing characteristics of a -10
www.DatasSpheeetd4Ug.croamde industrial device are the same as for a -10
speed grade commercial device). However, only selected
speed grades and/or devices might be available in the
industrial range.
All supply voltage and junction temperature specifications
are representative of worst-case conditions. The parame-
ters included are common to popular designs and typical
applications.
This Virtex-4 FPGA Data Sheet is part of an overall set of
documentation on the Virtex-4 family of FPGAs that is avail-
able on the Xilinx website:
Virtex-4 Family Overview, DS112
Virtex-4 FPGA User Guide, UG070
Virtex-4 Configuration Guide, UG071
XtremeDSP for Virtex-4 FPGAs User Guide, UG073
Virtex-4 Packaging and Pinout Specification, UG075
Virtex-4 PCB Designer’s Guide, UG072
Virtex-4 RocketIO™ Multi-Gigabit Transceiver User
Guide, UG076
Virtex-4 FPGA Embedded Tri-Mode Ethernet MAC
User Guide, UG074
PowerPC® 405 Processor Block Reference Guide,
UG018
All specifications are subject to change without notice.
Virtex-4 FPGA DC Characteristics
Table 1: Absolute Maximum Ratings
Symbol
Description
VCCINT
VCCAUX
VCCO
VBATT
VREF
Internal supply voltage relative to GND
Auxiliary supply voltage relative to GND
Output drivers supply voltage relative to GND
Key memory battery backup supply
Input reference voltage
I/O input voltage relative to GND
(all user and dedicated I/Os)
VIN
I/O input voltage relative to GND
(restricted to maximum of 100 user I/Os)(3,4)
2.5V or below I/O input voltage relative to GND
(user and dedicated I/Os)
Current applied to an I/O pin, powered or unpowered
IIN Total current applied to all I/O pins, powered or unpowered
–0.5 to 1.32
–0.5 to 3.0
–0.5 to 3.75
–0.5 to 4.05
–0.3 to 3.75
Units
V
V
V
V
V
–0.75 to 4.05
V
–0.95 to 4.4
(Commercial Temperature)
–0.85 to 4.3
(Industrial Temperature)
V
–0.75 to VCCO +0.5
±100
±200
V
mA
mA
© 2004–2008 Xilinx, Inc. All rights reserved. XILINX, the Xilinx logo, the Brand Window, and other designated brands included herein are trademarks of Xilinx, Inc. The PowerPC
name and logo are registered trademarks of IBM Corp. and used under license therefrom. All other trademarks are the property of their respective owners.
DS302 (v3.2) April 10, 2008
Product Specification
www.xilinx.com
1




Xilinx

XC4VLX100 Datasheet Preview

XC4VLX100 Datasheet

(XC4VL(s)X15 - XC4VL(s)X200) FPGA (Field-Programmable Gate Array)

No Preview Available !

R Virtex-4 FPGA Data Sheet: DC and Switching Characteristics
Table 1: Absolute Maximum Ratings (Continued)
Symbol
Description
Units
Voltage applied to 3-state 3.3V output
(all user and dedicated I/Os)
–0.75 to 4.05
V
VTS
Voltage applied to 3-state 3.3V output
(restricted to maximum of 100 user I/Os)(3,4)
–0.95 to 4.4
(Commercial Temperature)
–0.85 to 4.3
(Industrial Temperature)
V
2.5V or below I/O input voltage relative to GND
(user and dedicated I/Os)
–0.75 to VCCO +0.5
V
AVCCAUXRX
Receive auxiliary supply voltage relative to analog ground, GNDA
(RocketIO pins)
–0.5 to 1.32
V
www.DataSheAeVt4CUC.cAomUXTX
Transmit auxiliary supply voltage relative to analog ground, GNDA
(RocketIO pins)
–0.5 to 1.32
V
AVCCAUXMGT
Management auxiliary supply voltage relative to analog ground, GNDA
(RocketIO pins)
–0.5 to 3.0
V
VTRX
Terminal receive supply voltage relative to GND
–0.5 to 3.0
V
VTTX
Terminal transmit supply voltage relative to GND
–0.5 to 1.65
V
TSTG
TSOL
TJ
Storage temperature (ambient)
Maximum soldering temperature(2)
Maximum junction temperature(2)
–65 to 150
+220
+125
°C
°C
°C
Notes:
1. Stresses beyond those listed under Absolute Maximum Ratings might cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those listed under Operating Conditions is not implied. Exposure to
Absolute Maximum Ratings conditions for extended periods of time might affect device reliability.
2. For soldering guidelines and thermal considerations, see the Virtex-4 Packaging and Pinout Specification on the Xilinx website.
3. When using more than 100 3.3V I/Os, refer to the Virtex-4 FPGA User Guide, Chapter 6, “3.3V I/O Design Guidelines.”
4. For more flexibility in specific designs, a maximum of 100 user I/Os can be stressed beyond the normal spec for no more than 20% of a data period.
There are no bank restrictions.
Table 2: Recommended Operating Conditions
Symbol
Description
Min Max Units
VCCINT
VCCAUX
VCCO(1, 3, 4, 5)
VIN
IIN
Internal supply voltage relative to GND, TJ = 0° C to +85° C
Commercial
Internal supply voltage relative to GND, TJ = –40° C to +100° C Industrial
Auxiliary supply voltage relative to GND, TJ = 0° C to +85° C Commercial
Auxiliary supply voltage relative to GND, TJ = –40° C to +100° C Industrial
Supply voltage relative to GND, TJ = 0° C to +85° C
Commercial
Supply voltage relative to GND, TJ = –40° C to +100° C
Industrial
3.3V supply voltage relative to GND, TJ = 0° C to +85° C
Commercial
3.3V supply voltage relative to GND, TJ = –40° C to +100° C
Industrial
2.5V and below supply voltage relative to GND,
TJ = 0° C to +85° C
Commercial
2.5V and below supply voltage relative to GND,
TJ = –40° C to +100° C
Industrial
Maximum current through any pin in a powered or unpowered Commercial
bank when forward biasing the clamp diode.
Industrial
1.14
1.14
2.375
2.375
1.14
1.14
GND – 0.20
GND – 0.20
GND – 0.20
GND – 0.20
1.26
1.26
2.625
2.625
3.45
3.45
3.45
3.45
VCCO + 0.2
VCCO + 0.2
10
10
V
V
V
V
V
V
V
V
V
V
mA
mA
VBATT(2)
Battery voltage relative to GND, TJ = 0° C to +85° C
Battery voltage relative to GND, TJ = –40° C to +100° C
Commercial
Industrial
1.0
1.0
3.6 V
3.6 V
DS302 (v3.2) April 10, 2008
Product Specification
www.xilinx.com
2


Part Number XC4VLX100
Description (XC4VL(s)X15 - XC4VL(s)X200) FPGA (Field-Programmable Gate Array)
Maker Xilinx
Total Page 30 Pages
PDF Download

XC4VLX100 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 XC4VLX100 (XC4VL(s)X15 - XC4VL(s)X200) FPGA (Field-Programmable Gate Array)
Xilinx





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy