900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






XySemi

XB5608A Datasheet Preview

XB5608A Datasheet

One Cell Lithium-ion/Polymer Battery Protection IC

No Preview Available !

XB5608A
_____________________________________
___________________________________________________
____________
One Cell Lithium-ion/Polymer Battery Protection IC
GENERAL DESCRIPTION
The XB5608A product is a high
integration solution for lithium-
ion/polymer battery protection.
XB5608A contains advanced power
MOSFET, high-accuracy voltage
detection circuits and delay circuits.
XB5608A is put into an ultra-small
SOT23-5 package and only one
external component makes it an ideal
solution in limited space of battery pack.
XB5608A has all the protection functions
required in the battery application including
overcharging, overdischarging, overcurrent
and load short circuiting protection etc. The
accurate overcharging detection voltage
ensures safe and full utilization charging.
The low standby current drains little current
from the cell while in storage.
The device is not only targeted for digital
cellular phones, but also for any other
Li-Ion and Li-Poly battery-powered
information appliances requiring long-
term battery life.
FEATURES
·Protection of Charger Reverse
Connection
·Protection of Battery Cell Reverse
Connection
·Integrate Advanced Power MOSFET
with Equivalent of 16mRSS(ON)
·Ultra-small SOT23-5 Package
·Only One External Capacitor
Required
·Over-temperature Protection
·Overcharge Current Protection
·Two-step Overcurrent Detection:
-Overdischarge Current
-Load Short Circuiting
·Charger Detection Function
·0V Battery Charging Function
- Delay Times are generated inside
·High-accuracy Voltage Detection
·Low Current Consumption
- Operation Mode: 3.9μ A typ.
- Power-down Mode: 2.2μ A typ.
·RoHS Compliant and Lead (Pb) Free
APPLICATIONS
One-Cell Lithium-ion Battery Pack
Lithium-Polymer Battery Pack
Power Bank
XySemi Inc
Figure 1. Typical Application Circuit
- 1 - www.xysemi.com
REV0.3




XySemi

XB5608A Datasheet Preview

XB5608A Datasheet

One Cell Lithium-ion/Polymer Battery Protection IC

No Preview Available !

______________________________________ ___________________________________________________
ORDERING INFORMATION
XB5608A
____________
PART
NUMBER
Pack
age
Overcharg
e Detection
Voltage
[VCU] (V)
Overcharge
Release
Voltage
[VCL] (V)
Overdischarge Overdischarge
Detection
Release
Voltage
Voltage
[VDL] (V)
[VDR] (V)
Overcurrent
Detection
Current
[IOV1] (A)
XB5608A
SOT
23-5
4.30
4.10
2.40
3.0
9
Note: YWis manufacture date code, Ymeans the year, Wmeans the week
PIN CONFIGURATION
Top Mark
5608AYW(note)
PIN DESCRIPTION
Figure 2. PIN Configuration
XB5608A PIN
NUMBER
1
2
3
4,5
PIN NAME
PIN DESCRIPTION
VT
GND
VDD
VM
Test pinonly for vendor not used by application
Ground, connect the negative terminal of the battery to this pin
Power Supply
The negative terminal of the battery pack. The internal FET switch
connects this terminal to GND
ABSOLUTE MAXIMUM RATINGS
(Note: Do not exceed these limits to prevent damage to the device. Exposure to absolute maximum rating
conditions for long periods may affect device reliability.)
PARAMETER
VDD input pin voltage
VM input pin voltage
Operating Ambient Temperature
VALUE
-0.3 to 6
-6 to 10
-40 to 85
UNIT
V
V
°C
XySemi Inc
- 2 - www.xysemi.com
REV0.3


Part Number XB5608A
Description One Cell Lithium-ion/Polymer Battery Protection IC
Maker XySemi
Total Page 12 Pages
PDF Download

XB5608A Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 XB5608A One Cell Lithium-ion/Polymer Battery Protection IC
XySemi





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy