TRANSIENT VOLTAGE SUPPRESSOR
ZEN ELECTRONIC PARTNO.3KP5.0A(CA)-3KP220A(CA)
The 3KP series of high current uni/bi-directional transient
suppressors are designed for A.C. line protection and high
power DC bus clamping applications. These devices offer
uni/bi-directional port protection from 5.0 volts to 220 volts.
They provide a clamping voltage lower than the avalanche
voltage. Therefore, any voltage rise due to increased
current conduction is contained to a minimum, providing
the best possible protection level. They can also be
connected in series and/or parallel to create very high
capacity protection solutions.
Low zener impedance.
Excellent clamping capability.
JEDEC R-6/P-600 Molded Plastic.
Repetition rate (duty cycle): 0.01%.
Color band denoted cathode except bidirectional
High temperature soldering: 260 /10s at terminals.
Glass passivated chip junction in R-6/P600 package.
3000W Peak Pulse power capability at 10×1000 s waveform.
Fast response time: typically less than 1.0ps from 0V to VBR min.
Symbol
(TA=25ºC, RH=45%-75%, unless otherwise noted)
Parameter
Symbol
Peak pulse power dissipation on 10/1000 s
waveform
Peak pulse current of on 10/1000 s
waveform
PPP
IPP
Steady state power dissipation at TL=75
PM(AV)
Operating junction and Storage temperature
range
Peak forward surge current, 8.3ms single
half sine-wave
TSTG, TJ
IFSM
Value
3000
See next table
6.5
-55 to +150
300
www.zenesd.com
Unit
W
A
W
A
1
