Datasheet4U Logo Datasheet4U.com

ANG-21HAW1 - Angle Position Sensors

Download the ANG-21HAW1 datasheet PDF (ANG-11HAW1 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for angle position sensors.

Description

The ANG Series sensors are non-contact, intrinsically linear position sensors with one or two independent (redundant) outputs.

The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets.

Features

  • Angular position sensor with high tolerance for misalignment.
  • Non-contact angular position sensing and full 360O rotation.
  • Custom programming available for: angle range, slope, PWM output.
  • contact factory.
  • No mechanical interface means no parts to wear out or jam.
  • Comes with 20 AWG 305 mm (12”) discrete wire leads.
  • RoHS Compliant.
  • IP68.
  • Maximum air gap of 6 mm (0.24”).
  • Compliant to industrial/automotive EMC/EMI/ESD directives Typical A.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (ANG-11HAW1-ZF.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number ANG-21HAW1
Manufacturer ZF
File Size 404.74 KB
Description Angle Position Sensors
Datasheet download datasheet ANG-21HAW1 Datasheet

📁 Similar Datasheet

Other Datasheets by ZF

Full PDF Text Transcription

Click to expand full text
Angle Position Sensors ANG Sensors Thin, programmable, non-contact magnetic position sensors capable of continuous rotation, with dual outputs available. Description The ANG Series sensors are non-contact, intrinsically linear position sensors with one or two independent (redundant) outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft. Actuator magnet part number AS500106 is required to assure proper operation (ordered separately).
Published: |