| Description | The functional blocks within the device are shown in Fig. 3. These are described below:NRZ to MLT3 Encoder The serial data from the shifter then passes through an encoder which converts the NRZI binary data into the three level MLT-3 format for transmission by the 'TXO' outputs. Transmit Line Drivers There are two on-chip Line Drivers both of which share the output pins TXOP and TXON. The N10/100 ... |
| Features |
s Compatible with IEEE-802.3 Standards s Operates over 100 Meters of STP and Category 5 UTP cable s Five Bit TTL Level Symbol Interface s Integrated Clock and Data Recovery s Supports Full-duplex Operation s Integral 10 Mb/s Buffer for Dual 10 Mb/s & 100 Mb/s Applications s Adaptive Equalization s 25MHz to 125MHz Transmit Clock Multiplier s Program...
|
| Datasheet |
 NWK914D Datasheet - 173.94KB |
