Datasheet4U Logo Datasheet4U.com

ZL60013 - PIN Preamplifier

Description

This optical receiver is designed for SDI (Serial Digital Interface) HDTV (high definition television) optical fiber transmission systems.

The product follows the ANSI/SMPTE 292 M standard and is capable of handling DC-unbalanced (pathological) signals.

Features

  • Data rate up to 1.5 Gbps 1310 nm, 1550 nm PIN TIA with AGC Handles DC-unbalanced signals Wide dynamic range TO-46 assembly 3.3 V power supply SMF and MMF.

📥 Download Datasheet

Datasheet Details

Part number ZL60013
Manufacturer Zarlink Semiconductor
File Size 288.42 KB
Description PIN Preamplifier
Datasheet download datasheet ZL60013 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ZL60212 880 nm High-Performance Single-chip DUPLEX Zarlink Semiconductor Inc
ZL60212TBD 880 nm High-Performance Single-chip DUPLEX Zarlink Semiconductor Inc
ZL60212TDD 880 nm High-Performance Single-chip DUPLEX Zarlink Semiconductor Inc
ZL60212TGD 880 nm High-Performance Single-chip DUPLEX Zarlink Semiconductor Inc
ZL60301 Parallel Fiber Optic Transceiver (4 + 4) x 2.7 Gbps Zarlink Semiconductor Inc

Other Datasheets by Zarlink Semiconductor

Part Number Description
ZL60010 High-Performance Linear PIN
ZL60012 PIN Preamplifier
ZL60015 Optical Receiver
ZL60001 High speed 2.5 Gbps 850 nm VCSEL
ZL60003 Plastic Optical Fiber Communications

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ZL60013 1310 nm, 1550 nm 1.5 Gbps PIN Preamplifier for SDI HDTV Data Sheet December 2003 Ordering Information ZL60013TED, TO-46 with lens in SC-housing -40° C to +85 ° C Description This optical receiver is designed for SDI (Serial Digital Interface) HDTV (high definition television) optical fiber transmission systems. The product follows the ANSI/SMPTE 292 M standard and is capable of handling DC-unbalanced (pathological) signals. The receiver operates at 3.3 V and contains an InGaAs PIN photodiode and a transimpedance amplifier with AGC (Automatic Gain Control ), assembled in a TO-46 package. Its double-lens optical system is designed for use with single-mode fiber as well as multi-mode fiber with a core diameter up to 62.5 µm. Reliability assurance is based on Telecordia GR-468-CORE.
Published: |