Datasheet4U Logo Datasheet4U.com

AS5510 - Linear Hall Sensor

General Description

Figure 1: Added Value of Using AS5510 Benefits Highest reliability and durability Ideal for battery powered devices Easy to use High-resolution output Operates in wide magnetic range Smallest form factor AS5510 Linear Hall Sensor with I²C Output The AS5510 is a Linear Hall Sensor with 10 bit resolu

Key Features

  • The benefits and features of AS5510, Linear Hall sensor with I²C output are listed below: Features Contactless position measurement Power down mode Simple configuration over the I2C interface 10bit resolution Programmable sensitivity Available in two different packages: WLCSP & SOIC8.

📥 Download Datasheet

Datasheet Details

Part number AS5510
Manufacturer ams
File Size 577.33 KB
Description Linear Hall Sensor
Datasheet download datasheet AS5510 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AS5501 Multimode Powerline-Modem austriamicrosystems AG
AS5502 Multimode Powerline-Modem austriamicrosystems AG
AS50 Axial Shielded Inductors Allied Components International
AS50-100K-RC Axial Shielded Inductors Allied Components International
AS50-101K-RC Axial Shielded Inductors Allied Components International

Other Datasheets by ams

Part Number Description
AS5013 Low Power Integrated Hall IC
AS5030 8-Bit Programmable High Speed Magnetic Rotary Encoder
AS5040 10-Bit Programmable Magnetic Rotary Encoder
AS5045 12-Bit Programmable Magnetic Rotary Position Sensor
AS5045B 12-Bit Programmable Magnetic Position Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
General Description Figure 1: Added Value of Using AS5510 Benefits Highest reliability and durability Ideal for battery powered devices Easy to use High-resolution output Operates in wide magnetic range Smallest form factor AS5510 Linear Hall Sensor with I²C Output The AS5510 is a Linear Hall Sensor with 10 bit resolution and I²C interface. It can measure absolute position of lateral movement of a simple 2-pole magnet. Depending on the magnet size, a lateral stroke of 0.5~2mm can be measured with air gaps around 1.0mm. To conserve power, the AS5510 may be switched to a power down state when it is not used. It is available in a WLCSP and SOIC8 package and qualified for an ambient temperature range from -30°C to 85°C. Ordering Information and Content Guide appear at end of datasheet.