TSL3301CL Datasheet | ams

102 × 1 Linear Optical Sensor Array with Analog-to-Digital Converter General Description The TSL3301CL is a high-sensitivity 300-dpi, linear optical sensor array with integrated 8-bit analog-to-digital converters. The array consists of 102 pixels: 100 inner pixels and 2 end pixels. The inner pixels measure 85 μm (H) by 77 μm (W) on 85-μm centers and the end pixels are 132 μm (H) by 49 μm (W). Associated with each pixel is a charge integrator/amplifier and sample-hold circuit. All pixels have concurrent integration periods and sampling times. The array is split into three 34-pixel zones, with each zone having programmable gain and offset levels. Data munication is acplished through a three-wire serial interface. Intended for use in high performance, cost-sensitive scanner applications, the TSL3301CL is based on a linear sensor array die that has expanded capability, including multi-die addressing and cascade options. Please contact ams for additional information on die and multi-die package availability. Ordering Information and Content Guide appear at end of datasheet. Figure 1: Added Value Of Using TSL3301CL Key Benefits & Features The benefits and Features of TSL3301CL, 102 × 1 Linear Optical Sensor Array with Analog-to-Digital Converter are listed below: Benefits Features - Provides High Density Pixel Count - 102 x 1 Sensor-Element Organization - Enables High Resolution Scanning - 300 Dots-Per-Inch (DPI) Sensor Pitch - Provides Integrated Analog-to-Digital Conversion - Digital Output - Enables Scalable Operating Range - Programmable Gain - High Sensitivity - On-Chip 8-Bit Analog-to-Digital Conversion - Three-Zone Programmable Offset (Dark Level) and Gain - High Speed Serial Interface - 1 MHz Pixel Rate - Single 3V to 5.5V Supply ams Datasheet [v1-01] 2017-Aug-30 Page 1 Document Feedback Figure 2: TSL3301CL Block Diagram TSL3301CL- General Description - Replacement for TSL3301 - Ro HS pliant Block...