Datasheet4U Logo Datasheet4U.com

AS5048A - Magnetic Rotary Encoder

Description

The AS5048 is an easy to use 360° angle position sensor with a 14-bit high resolution output.

The maximum system accuracy is 0.05° assuming linearization and averaging is done by the external microcontroller.

📥 Download Datasheet

Datasheet preview – AS5048A

Datasheet Details

Part number AS5048A
Manufacturer austriamicrosystems
File Size 1.21 MB
Description Magnetic Rotary Encoder
Datasheet download datasheet AS5048A Datasheet
Additional preview pages of the AS5048A datasheet.

📁 Similar Datasheet

  • AS5048A - Magnetic Rotary Encoder (ams)
  • AS5048B - Magnetic Rotary Encoder (ams)
  • AS5040 - 10-Bit Programmable Magnetic Rotary Encoder (ams)
  • AS5043 - MAGNETIC ANGLE ENCODER (austriamicrosystems AG)
  • AS5045 - 12 BIT PROGRAMMABLE MAGNETIC ROTARY ENCODER (austriamicrosystems AG)
  • AS5045 - 12-Bit Programmable Magnetic Rotary Position Sensor (ams)
  • AS5045B - 12-Bit Programmable Magnetic Position Sensor (ams)
  • AS5046 - MAGNETIC ANGLE ENCODER (austriamicrosystems AG)
  • AS5047D - 14-bit On-Axis Magnetic Rotary Position Sensor (ams)
  • AS5047P - 14-bit On-Axis Magnetic Rotary Position Sensor (ams)
Other Datasheets by austriamicrosystems
  • AS5048B - Magnetic Rotary Encoder
  • AS5055 - Low power 12 bit magnetic rotary encoder
  • AS5132 - 360 Step (8.5 bit) Programmable High Speed Magnetic Rotary Encoder
  • AS5410 - 3D-Hall Encoder absolute linear

Full PDF Text Transcription

Click to expand full text
AS5048A/AS5048B Magnetic Rotary Encoder 14-bit Angular Position Sensor Datasheet General Description The AS5048 is an easy to use 360° angle position sensor with a 14-bit high resolution output. The maximum system accuracy is 0.05° assuming linearization and averaging is done by the external microcontroller. The IC measures the absolute position of the magnet’s rotation angle and consists of Hall sensors, analog digital converter and digital signal processing. The zero position can be programmed via SPI or I²C command. Therefore no programmer is needed anymore. This simplifies the assembly of the complete system because the zero position of the magnet does not need to be mechanically aligned. This helps developers to shorten their developing time.
Published: |