74HC157 Datasheet | Texas Instruments

Features - Wide operating voltage range of 2 V to 6 V - Outputs can drive up to 15 LSTTL loads - Low power consumption, 80-µA max ICC - Typical tpd = 11 ns - ±6-m A output drive at 5 V - Low input current of 1 µA max 2 Description The SNx4HC157 contains four data selectors/ multiplexers to select one of two data sources. All channels are controlled by the same address select (A/B) input, and strobe (G) input. A high level at the strobe terminal forces all outputs low. PART NUMBER SN74HC157D SN74HC157DB SN74HC157N SN74HC157NS SN74HC157PW SN54HC157J SNJ54HC157FK SNJ54HC157W Device Information PACKAGE(1) BODY SIZE (NOM) SOIC (16) 9.90 mm × 3.90 mm SSOP (16) 6.20 mm × 5.30 mm PDIP (16) 19.31 mm × 6.35 mm SO (16) 6.20 mm × 5.30 mm TSSOP (16) 5.00 mm × 4.40 mm CDIP (16) 24.38 mm × 6.92 mm LCCC (20) 8.89 mm × 8.45 mm CFP (16) 10.16 mm × 6.73 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. Pin numbers shown are for the D, DB, J, N, NS, PW, and W packages. Functional Block Diagram An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. SN54HC157, SN74HC157 SCLS113E - DECEMBER 1982 - REVISED FEBRUARY 2022 .ti. Table of Contents 1 Features 1 2 Description 1 3 Revision History 2 4 Pin Configuration and Functions 3 5 Specifications 4 5.1 Absolute Maximum Ratings 4 5.2 Remended Operating Conditions(1) 4 5.3 Thermal Information 4 5.4 Electrical...