74HC273 - Octal D-Type Flip-Flops

Product Overview

Texas Instruments

Datasheet Details

Part number	74HC273
Manufacturer	Texas Instruments
File Size	2.10 MB
Description	Octal D-Type Flip-Flops
Datasheet	74HC273 Datasheet
Additional preview pages of the 74HC273 datasheet.

Product details

Description

The SNx4HC273 devices are positive-edge-triggered D-type flip-flops with a direct active low clear ( CLR) input.

Information at the data (D) inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock (CLK) pulse.

Features

Wide operating voltage range of 2 V to 6 V.
Outputs can drive up to 10 LSTTL loads.
Low power consumption, 80-µA maximum ICC.
Typical tpd = 12 ns.
±4-mA output drive at 5 V.
Low input current of 1-µA maximum.
Contain eight flip-flops with single-rail outputs.
Direct clear input.
Individual data input to each flip-flop.
On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted.

📁 Similar Datasheet

74HC273 - Octal D-type flip-flop (NXP)
74HC273 - Octal D-type flip-flop (nexperia)
74HC273-Q100 - Octal D-type flip-flop (NXP)
74HC273-Q100 - Octal D-type flip-flop (nexperia)
74HC273A - Octal D Flip-Flop (ON Semiconductor)
74HC273BQ - Octal D-type flip-flop (nexperia)
74HC273D - Octal D-Type Flip-Flop (Toshiba)
74HC273D - Octal D-type flip-flop (nexperia)

Other Datasheets by Texas Instruments

74HC27 - Triple 3-Input NOR Gates
74HC240 - High-Speed CMOS Logic Octal Buffer/Line Drivers
74HC241 - High-Speed CMOS Logic Octal Buffer/Line Drivers
74HC244 - Octal Buffers and Line Drivers
74HC245 - Octal Bus Transceivers
74HC251 - Data Selectors/Multiplexers

Published: Jul 10, 2024 |