Datasheet4U Logo Datasheet4U.com

75ALS175 - QUADRUPLE DIFFERENTIAL LINE RECEIVER

General Description

The SN75ALS175 is a monolithic quadruple differential line receiver with 3-state outputs.

It is designed to meet the requirements of ANSI Standards EIA/TIA-422-B, EIA/TIA-423-B, and RS-485 and several ITU recommendations.

Key Features

  • high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ± 200 mV over a common-mode input voltage range of.
  • 12 V to 12 V. The SN75ALS175 is characterized for operation from 0°C to 70°C.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by Texas Instruments

Part Number Description
75ALS170 TRIPLE DIFFERENTIAL BUS TRANSCEIVER
75ALS170 TRIPLE DIFFERENTIAL BUS TRANSCEIVER
75ALS170A TRIPLE DIFFERENTIAL BUS TRANSCEIVER
75ALS171 TRIPLE DIFFERENTIAL BUS TRANSCEIVERS
75ALS171A TRIPLE DIFFERENTIAL BUS TRANSCEIVERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN75ALS175 QUADRUPLE DIFFERENTIAL LINE RECEIVER D Meets or Exceeds the Requirements of ANSI EIA/TIA-422-B, EIA/TIA-423-B, and RS-485 D Meets ITU Recommendations V.10, V.11, X.26, and X.27 D Designed for Multipoint Bus Transmission on Long Bus Lines in Noisy Environments D Low Supply Current Requirement 27 mA Max D Common-Mode Input Voltage Range of – 12 V to 12 V D Input Sensitivity . . . ± 200 mV D Input Hysteresis . . . 50 mV Typ D High Input Impedance . . . 12 kΩ Min D Operates From Single 5-V Supply SLLS131C – SEPTEMBER 1991 – REVISED MAY 1995 N OR NS† PACKAGE (TOP VIEW) 1B 1 1A 2 1Y 3 1,2EN 4 2Y 5 2A 6 2B 7 GND 8 16 VCC 15 4B 14 4A 13 4Y 12 3,4EN 11 3Y 10 3A 9 3B † The NS package is only available left-ended taped and reeled (order device SN75ALS175NSLE).