75ALS192
75ALS192 is QUADRUPLE DIFFERENTIAL LINE DRIVER manufactured by Texas Instruments.
description
The four differential line drivers are designed for data transmission over twisted-pair or parallel-wire transmission lines. They meet the requirements of ANSI Standard EIA/TIA-422-B and ITU Remendations V.11 and are patible with 3-state TTL circuits. Advanced low-power Schottky technology provides high speed without the usual power penalties. Standby supply current is typically only 26 m A, while typical propagation delay time is less than 10 ns.
High-impedance inputs maintain low input currents, less than 1 µA for a high level and less than 100 µA for a low level. plementary output-enable inputs (G and G) allow these devices to be enabled at either a high input level or low input level. The SN75ALS192 is capable of data rates in excess of 20 Mbit/s and is designed to operate with the SN75ALS193 quadruple line receiver.
The SN75ALS192 is characterized for operation from 0°C to 70°C.
FUNCTION TABLE (each driver)
INPUT A
ENABLES
OUTPUTS
H = high level, L = low level, X = irrelevant, Z = high impedance (off)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all...
