75LBC184 Datasheet | Texas Instruments

Features - 1 Integrated Transient Voltage Suppression - ESD Protection for Bus Terminals Exceeds: ±30 k V IEC 61000-4-2, Contact Discharge ±15 k V IEC 61000-4-2, Air-Gap Discharge ±15 k V EIA/JEDEC Human Body Model - Circuit Damage Protection of 400-W Peak (Typical) Per IEC 61000-4-5 - Controlled Driver Output-Voltage Slew Rates Allow Longer Cable Stub Lengths - 250-kbps in Electrically Noisy Environments - Open-Circuit Fail-Safe Receiver Design - 1/4 Unit Load Allows for 128 Devices Connected on Bus - Thermal Shutdown Protection - Power-Up and Power-Down Glitch Protection - Each Transceiver Meets or Exceeds the Requirements of TIA/EIA-485 (RS-485) and ISO/IEC 8482:1993(E) Standards - Low Disabled Supply Current 300 μA Maximum - Pin patible With SN75176 3 Description The SN75LBC184 and SN65LBC184 devices are differential data line transceivers in the trade-standard footprint of the SN75176 with built-in protection against high-energy noise transients. This feature provides a substantial increase in reliability for better immunity to noise transients coupled to the data cable over most existing devices. Use of these circuits provides a reliable low-cost direct-coupled (with no isolation transformer) data line interface without requiring any external ponents. The SN75LBC184 and SN65LBC184 can withstand overvoltage transients of 400-W peak (typical). The conventional bination wave called out in IEC 61000-4-5 simulates the overvoltage transient and models a unidirectional surge caused by overvoltages from switching and secondary lightning transients. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) SN65LBC184, SN75LBC184 SOIC (8) PDIP (8) 4.90 mm × 3.91 mm 9.81 mm × 6.35 mm (1) For all available packages, see the orderable addendum at the end of the datasheet. 2 Applications - Industrial Networks - Utility Meters - Motor Control Logic Symbol NOTE: This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. An IMPORTANT NOTICE...