Datasheet4U Logo Datasheet4U.com

ADC083000 Datasheet Low Power A/D Converter

Manufacturer: Texas Instruments

Overview: ADC083000 www.ti.com SNAS358N – JUNE 2006 – REVISED JULY 2009 ADC083000 8-Bit, 3 GSPS, High Performance, Low Power A/D Converter Check for Samples:.

General Description

The ADC083000 is a single, low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 3.4 GSPS.

Consuming a typical 1.9 Watts at 3 GSPS from a single 1.9 Volt supply, this device is specified to have no missing codes over the full operating temperature range.

The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the selfcalibration scheme enable an excellent response of all dynamic parameters up to Nyquist, producing a high 7.0 Effective Number Of Bits, (ENOB) with a 748 MHz input signal and a 3 GHz sample rate while providing a 10-18 Word Error Rate.

Key Features

  • 1.
  • 2 Single +1.9V ±0.1V Operation.
  • Choice of SDR or DDR Output Clocking.
  • Serial Interface for Extended Control.
  • Adjustment of Input Full-Scale Range and Offset.
  • Duty Cycle Corrected Sample Clock.
  • Test Pattern.