Datasheet4U Logo Datasheet4U.com

ADC08500 Datasheet 8-Bit A/D Converter

Manufacturer: Texas Instruments

📥 Download Datasheet

General Description

The ADC08500 is a low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 500 MSPS.

Consuming a typical 0.8 Watts at 500 MSPS from a single 1.9 Volt supply, this device is ensured to have no missing codes over the full operating temperature range.

The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the selfcalibration scheme enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.5 ENOB with a 250 MHz input signal and a 500 MHz sample rate while providing a 10-18 B.E.R.

Overview

ADC08500 www.ti.com SNAS373E – MAY 2007 – REVISED APRIL 2013 ADC08500 High Performance, Low Power 8-Bit, 500 MSPS A/D Converter Check for Samples:.

Key Features

  • 1.
  • 2 Internal Sample-and-Hold.
  • Single +1.9V ±0.1V Operation.
  • Choice of SDR or DDR Output Clocking.
  • Multiple ADC Synchronization Capability.
  • Ensured No Missing Codes.
  • Serial Interface for Extended Control.
  • Fine Adjustment of Input Full-Scale Range and Offset.
  • Duty Cycle Corrected Sample Clock.

📁 Similar Datasheet

Brand Logo Part Number Description Manufacturer
National Semiconductor Logo ADC08500 500 MSPS A/D Converter National Semiconductor

More Datasheets from Texas Instruments

Part Number Description
ADC0801 Analog-to-Digital Converter
ADC0802 Analog-to-Digital Converter
ADC0803 Analog-to-Digital Converter
ADC08031 8-Bit High-Speed Serial I/O A/D Converters
ADC08032 8-Bit High-Speed Serial I/O A/D Converters
ADC08034 8-Bit High-Speed Serial I/O A/D Converters
ADC08038 8-Bit High-Speed Serial I/O A/D Converters
ADC0804 Analog-to-Digital Converter
ADC0805 Analog-to-Digital Converter
ADC08060 A/D Converter