Datasheet4U Logo Datasheet4U.com

ADC08D500 Datasheet Dual 8-Bit A/D Converter

Manufacturer: Texas Instruments

General Description

The ADC08D500 is a dual, low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 500 MSPS.

Consuming a typical 1.4 Watts at 500 MSPS from a single 1.9 Volt supply, this device is ensured to have no missing codes over the full operating temperature range.

The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the selfcalibration scheme enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.5 ENOB with a 250 MHz input signal and a 500 MHz sample rate while providing a 10-18 B.E.R.

Overview

ADC08D500 www.ti.com SNAS274F – MAY 2005 – REVISED APRIL 2013 ADC08D500 High Performance, Low Power, Dual 8-Bit, 500 MSPS A/D Converter Check for Samples:.

Key Features

  • 1.
  • 2 Internal Sample-and-Hold.
  • Single +1.9V ±0.1V Operation.
  • Choice of SDR or DDR Output Clocking.
  • Interleave Mode for 2x Sampling Rate.
  • Multiple ADC Synchronization Capability.
  • Ensured No Missing Codes.
  • Serial Interface for Extended Control.
  • Fine Adjustment of Input Full-Scale Range and Offset.
  • Duty Cycle Corrected Sample Clock.