ADS5402 Datasheet | Texas Instruments

FEATURES - Dual Channel - 12-Bit Resolution - Maximum Clock Rate: 800 Msps - Low Swing Fullscale Input: 1.0 Vpp - Analog Input Buffer with High Impedance Input - Input Bandwidth (3d B): >1.2GHz - Data Output Interface: DDR LVDS - Optional 2x Decimation with Low Pass or High Pass Filter - 196-Pin BGA Package (12x12mm) DESCRIPTION The ADS5402 is a high linearity dual channel 12-bit, 800 Msps analog-to-digital converter (ADC) easing front end filter design for wide bandwidth receivers. The analog input buffer isolates the internal switching of the on-chip track-and-hold from disturbing the signal source as well as providing a high-impedance input. Optionally the output data can be decimated by two. Designed for high SFDR, the ADC has low-noise performance and very good spurious-free dynamic range over a large input-frequency range. The device is available in a 196-pin BGA package and is specified over the full industrial temperature range (- 40°C to 85°C). APPLICATIONS - Test and Measurement Instrumentation - Ultra-Wide Band Software Defined Radio - Data Acquisition - Power Amplifier Linearization - Signal Intelligence and Jamming - Radar and Satellite Systems - Microwave Receivers - Cable Infrastructure - Non-Destructive Testing KEY SPECIFICATIONS - Power Dissipation: 1.1 W/ch - Spectral Performance at fin = 230 MHz IF - SNR: 61.3 d BFS - SFDR: 74 d Bc - Spectral Performance at fin = 700 MHz IF - SNR: 59.8 d BFS - SFDR: 69 d Bc INA CLKIN SYNC Clk Buffer 12bit 800Msps Digital Block DA[11 :0] DACLK 12bit 800Msps Digital...