ADS8517
ADS8517 is ANALOG-TO-DIGITAL CONVERTER manufactured by Texas Instruments.
FEATURES
- 23 200-k Hz Minimum Sampling Rate
- 4-V, 5-V, and ±10-V Input Ranges with
High-Impedance Input
- ±1.5 LSB Max INL
- +1.5/- 1 LSB Max/Min DNL, 16 Bits NMC
- ±2-m V Max BPZ, ±0.6 ppm/°C BPZ Drift
- ±2-m V Max UPZ, ±0.15 ppm/°C UPZ Drift
- 88.8-d B SINAD with 10-k Hz Input
- SPI™-patible Serial Output With
Daisy-Chain (TAG), SPI Master/Slave Feature
- Full Parallel Interface
- Binary Twos plement or Straight Binary
Output Code Formats
- Single 4.5-V to 5.5-V Analog Supply, 1.65-V to
5.5-V Interface Supply
- Uses Internal 2.5-V or External Reference
- No External Precision Resistors Required
- Low Power Dissipation (ADC+REF+BUF):
- 47 m W Typ, 60 m W Max at 200 k SPS
- 50-µW Max Power-Down Mode
- Pin-patible with 16-Bit ADS7807 and
ADS8507, and 12-Bit ADS7806 and ADS8506
- SO-28 and TSSOP-28 Packages
APPLICATIONS
- Portable Test Equipment
- USB Data Acquisition Module
- Medical Equipment
- Industrial Process Control
- Digital Signal Processing
- Instrumentation
DESCRIPTION
The ADS8517 is a plete low-power, single 5-V supply, 16-bit sampling analog-to-digital (A/D) converter. It contains a plete, 16-bit, capacitor-based, successive approximation register (SAR) A/D converter with sample-and-hold, clock, reference, and data interface. The converter can be configured for a variety of input ranges including ±10 V, 4 V, and 5 V. For most input ranges, the input voltage can swing to 25 V or
- 25 V without damage to the device.
An SPI-patible serial interface allows data to be synchronized to an internal or external clock. A full parallel interface using the selectable BYTE pin is also provided to allow the maximum system design flexibility. The ADS8517 is specified at a 200-k Hz sampling rate over the industrial
- 40°C to +85°C temperature range.
R1IN
40 k...
