AM26C32I Datasheet | Texas Instruments

Features - Meets or exceeds the requirements of ANSI TIA/EIA-422-B, TIA/EIA-423-B, and ITU remendation V.10 and V.11 - Low power, ICC = 10 m A typical - ±7-V mon-mode range with ±200-m V sensitivity - Input hysteresis: 60 m V typical - tpd = 17 ns typical - Operates from a single 5-V supply - 3-State outputs - Input fail-safe circuitry - Improved replacements for AM26LS32 device - Available in Q-temp automotive 2 Applications - High-reliability automotive applications - Factory automation - ATM and cash counters - Smart grid - AC and servo motor drives 4 G 12 G 2 1A 1 1B 3 Description The AM26C32 device is a quadruple differential line receiver for balanced or unbalanced digital data transmission. The enable function is mon to all four receivers and offers a choice of activehigh or active-low input. The 3-state outputs permit connection directly to a bus-organized system. Failsafe design specifies that if the inputs are open, the outputs always are high. The AM26C32 devices are manufactured using a Bi CMOS process, which is a bination of bipolar and CMOS transistors. This process provides the high voltage and current of bipolar with the low power of CMOS to reduce the power consumption to about one-fifth that of the standard AM26LS32, while maintaining AC and DC performance. Package Information PART NUMBER PACKAGE(1) PACKAGE SIZE(2) PDIP (N, 16) 19.3 mm × 9.4 mm SO (NS, 16) 10.2 mm × 7.8 mm SOIC (D, 16) 9.9 mm × 6 mm AM26C32 SSOP (DB, 16) 6.2mm × 7.8mm TSSOP (PW, 16) 5 mm × 6.4 mm CDIP (J, 16) mm × 6.92 mm CFP (W, 16) 10.3 mm × 6.73 mm LCCC (FK, 20) 8.90 mm × 8.90 mm (1) For more Information, see Section 11. (2) The package size (length × width) is a nominal value and includes pins, where...