AM26LV31 Datasheet | Texas Instruments

Features - 1 Switching Rates up to 32 MHz - Operate From a Single 3.3-V Supply - Propagation Delay Time: 8 ns Typical - Pulse Skew Time: 500 ps Typical - High Output-Drive Current: ±30 m A - Controlled Rise and Fall Times: 3 ns Typical - Differential Output Voltage With 100-Ω Load: 1.5 V Typical - Ultra-Low Power Dissipation - dc, 0.3 m W Maximum - 32 MHz All Channels (No Load), 385 m W Typical - Accept 5-V Logic Inputs With 3.3-V Supply - Low-Voltage Pin-to-Pin patible Replacement for AM26C31, AM26LS31, MB571 - High Output Impedance in Power-Off Condition - Driver Output Short-Protection Circuit - Package Options Include Plastic Small-Outline (D, NS) Packages 2 Applications - Motor Control: Brushless DC and Brushed DC - Field Transmitters: Temperature Sensors and Pressure Sensors - Temperature Sensors or Controllers Using Modbus 3 Description The AM26LV31C and AM26LV31I are Bi CMOS quadruple differential line drivers with 3-state outputs. They are designed to be similar to TIA/EIA-422-B and ITU Remendation V.11 drivers with reduced supply-voltage range. The devices are optimized for balanced-bus transmission at switching rates up to 32 MHz. The outputs have very high current capability for driving balanced lines such as twisted-pair transmission lines and provide a high impedance in the power-off condition. The enable function is mon to all four drivers and offers the choice of active-high or activelow enable inputs. The AM26LV31C and AM26LV31I are designed using Texas Instruments proprietary Lin IMPACT-C60™ technology, facilitating ultra-low power consumption without sacrificing speed. These devices offer optimum performance when used with the AM26LV32 quadruple line receivers. The AM26LV31C is characterized for operation from 0°C to 70°C. The AM26LV31I is characterized for operation from - 45°C to 85°.C Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) AM26LV31C SOIC (D) 16 9.90 mm x 3.91 mm AM26LV31I SOIC (D) 16 SO (NS) 16 9.90 mm x 3.91 mm 10.3 mm...